6VBA2

  • Y2K approval
  • Slot 1 Motherboard supports TRUE 133MHz External Clock Speed. (Max. 150MHz external clock speed supported)
  • New VIA Apollo Pro + PCIset (694X + VT82C686A) - true 133MHz VIA chipset
  • Supports Celeron®/Pentim II/Pentium® III Processors with slot 1 packing: operating at 266-600MHz
  • PCI x 5 , ISA x 1, 4x speed AGP x 1, AMR slot x 1
  • 3 x 168 pins SDRAM from 8MB to 768MB system memory auto detection
  • Supports Ultra DMA 33/66 hard disk
  • 4 x USB ports, Concurrent PCI, standard with PS/2 mouse and PS/2 keyboard connector
  • 2Mb Award BIOS with unique "SmartFlash" designed
  • PCI & AGP's buffer/wait state adjustable in BIOS, increase the PCI/AGP stability when overclock
  • RAM speed adjustable (2/3, 1 or 4/3 of the host clock speed), user can maximize the RAM speed
  • Built-in AC97 Digital Audio
  • Supports exclusive ESDJ (Easy Setting Dual Jumpers)
  • Supports Hardware Sleep/Resume and SMM (System Management Mode)
  • Supports Wake-on-LAN function
  • Schedule Power On
  • Power Loss Recovery
  • Remote Power On
  • Fan Status/Voltage/Temperature Monitoring Function
  • ATX form factor
Processor(CPU):

Supports Intel Pentium II Celeron® Processor at 66MHz, slot 1, operating at 233-400MHz.

Intel Pentium II or III Processor at 100MHz, slot 1, operating at 350-800MHz.

Supports 66/75/83/100/103/110/115/120/124/133/140/150MHz.

Chipset:

Designed with New VIA Appollo Pro133 PCIset (694X + VT82C686A) - true 133MHz VIA chipset support 4x AGP.

DRAM Memory:

Supports up to 768 MB of DRAM (minimum of 8 MB) on board, you can use 168 pins DIMM x 3.

It support Synchronous DRAM memory (SDRAM) at 66MHz, PC100 or PC133 (133MHz).

Expansion Slot:

Supports 1 X 16 bit ISA slots, 5 PCI Bus Master slots, a jumperless PCI INT# control scheme which reduces configuration confusion when plugging in PCI and AGP card(s). Allow selection of Individual PCI IRQ.

AMR (Audio Modem Raiser) slot x 1 and 4x speed AGP X 1.

On Board PCI IDE:

Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE interfaces.

2 independent high performance PCI IDE interfaces capable of supporting PIO Mode 3/4 and Ultra DMA 33/66 devices.

On Board I/O:

On-chip Super Multi-I/O for 1 FDD, 1 Parallel Port (EPP, ECP), 2 Serial Ports and 1 fast IR port.

I/O Connector:

Supports PS/2 MOUSE and 1 PS/2 Style Keyboard.

USB:

Supports the 4 x Universal Serial Bus (USB) connector. The onboard south bridge chip provides the means for connecting PC peripherals such as keyboards, joysticks, telephones and modems.

BIOS:

2Mb Award Plug & Play BIOS with unique "SmartFlash" designed. By simply pressing [Alt] [F2] to execute the built in "Award Flash Program" , which upgrade to the current BIOS as they are released at http://www.2themax.com under Drivers Page.

Built-in AC97 Digital Audio:

Dual full-duplex Direct Sound channels

H/W Sound Blaster Pro for DOS legacy compatibility

FM synthesis for legacy compatibility

Supports game and MIDI port.

Extended Function:

PCI & AGP's buffer/wait state adjustable in BIOS, increase the PCI/AGP stability when overclock.

RAM speed adjustable (2/3, 1 or 4/3 of the host clock speed), user can maximize the RAM speed.

Supports VIA System Diagnostic software to offer motherboard various status on Windows® 95/98 (Including temperature, voltage, cooling fan speed).

Built-in WOL (Wake On Lan) Connector.

Power Management:

Software power-down when using Windows® 95/98.

Supports ring-in feature (remote power-on through external modem which allows system system to be turned on remotely.

Resume by alarm which allows your system to turn on at a pre-selected time.

Power Loss Recovery which in the event of a power interruption, your system will automatically turn itself back on without user attention.

Supports CPU Hardware sleep and System Management Mode (SMM).

Supports Hot Key which features any key or password Keyboard Power-On function (KBPO).

Supports the CPU, PWR and Chassis fan Auto Stop in sleep mode.

Supports the System Power LED (Panel) blinks in the sleep mode.

Power Connector:

Built-in ATX 20 pins power supply connector.

Form Factor:

200mm x 305mm ATX size.

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我