VIA MVP3 PENTIUM AT MOTHERBOARD

SPECIFICATIONS

Chipset

VIA VT82C598MVP + VT82C586B, Winbond W83877F/TF

CPU

INTEL : 90 ~ 233MHz. Pentium processor and OverDrive processor(P54C / P55C)

CYRIX : 6x86 and 6x86L- P150+ / P166+ / P200+

6x86MX-PR166 / PR200 / PR233 and MII-266 / 300 / 333 / 366

IBM : 6x86 and 6x86L- P150+ / P166+ / P200+

6x86MX-PR166 / PR200 / PR233 / PR266 / PR300 / PR333

AMD : K5-PR90 / PR100 / PR120 / PR133 / PR150 / PR166

K6 -166 / 200 / 233 / 266 / 300, K6-2 / 300 / 333 / 350 / 366 / 380 / 400 / 450 / 500

K6-3 / 400 / 450 / 500

IDT : C6-180 / 200 / 225 / 240, Win-Chip2-200 / 233 / 266 / 300

CPU Voltage

(1) CPU I/O Voltage:“+3.3V DC”, “+3.5V DC” (2) CPU CORE Voltage: +1.3V DC ~ +3.5V DC

System Clock

60 / 66.8 / 75 / 83.3 / 95 / 100 MHz adjustable

Memory

DRAM : Three banks, each bank can be single or double sided. Memory size up to 1GB, supports SDRAM

memory (168-pin DIMM module x 3). Supports Parity / ECC

SRAM : 512KB pipelined burst SRAM on board

BIOS

128KB x 8 Flash ROM (AWARD Plug and Play system BIOS with DMI features)

Expansion Slots

AGP Slots : 32-bit x 1 (Supports 1x / 2x AGP graphics cards)

PCI Slots : 32-bit x 3 (All Master/Slave, PCI2.1 Compliant)

ISA Slots : 16-bit x 3 (One slot PCI/ISA shared)

IDE Ports

Two channel of PIO and “Ultra DMA/33” synchronous mode PCI IDE ports, maximum 4 IDE hard disk and

ATAPI CD-ROM device can be connected. Supports PIO mode 4, DMA mode 2 and Ultra DMA/33

Super I/O Ports, Mouse and Keyboard

1. Supports PS/2 mouse connector, PS/2 keyboard connector (optional) and AT keyboard connector

2. Two high speed NS16C550 compatible serial ports (UARTs)

3. One SPP/EPP/ECP mode Bi-directional parallel port

4. One floppy disk control port

USB Ports

Two Universal Serial Bus (USB) ports

IR Port

One HPSIR and ASKIR or FasterIR (optional) compatible Infrared port

Dimension

4-layers PCB, 220mm x 220mm (AT Form-Factor)

Software Compatibility

MS-DOS, Windows NT, OS/2, NOVELL, Windows 95, Windows 98, CAD/CAM.... etc. fully tested