INTEL 810 Twin Processor MICRO ATX Motherboard

SPECIFICATIONS

With AIR Bus (AZZA Intelligent ROM Bus) built-in

Chipset

Intel 810 Chipset (82810, 82801AA, 82802AB)

Twin CPU (Slot1 or Socket 370)

Intel Pentium II / III processor and Celeron processor

1. 66 Mhz FSB : supports 233 MHz up to 533 MHz CPUs 2. 100 Mhz FSB : supports 350 MHz up to 800 MHz CPUs

CPU Voltage

Switching Voltage Regulator on board, supports +1.30V DC ~ +3.50V DC CPU Core Voltage

System Clock

66.6 MHz or 100 MHz (Auto detected)

Main Memory

Three 168-pin DIMM sockets, support 8MB up to 256MB (for DIMM module made by 16Mb/64Mb SDRAM chips) or 512MB (for DIMM module made by 128Mb SDRAM chips).Use 3.3V-Unbuffered SDRAM DIMM modules

BIOS

AWARD System BIOS (Supports Plug & Play, ACPI, DMI and Green)

Expansion Slots

AMR Slot : One AMR slot for modem riser card

PCI Slots : 32-bit x 3 (All Master/Slave, PCI 2.1 Compliant)

ACPI Functions (PC99 Compliant)

1. Microsoft PC99 compliant, supports S0 to S5 system operating status

2. System resumed by panel-switch, keyboard, PS/2 mouse, modem ring-in, LAN signal…

3. Two LEDs onboard for system operating status indicating, one for S3 (STR) the other for S5 (Soft Off)

WOL Connector

One WOL connector supports Wake-On-LAN

USB Ports

Two Universal Serial Bus (USB) ports

IDE Ports

Two channel of Ultra DMA/66 Bus Master IDE ports, support up to 4 IDE Hard Disk, ATAPI CD-ROM and LS-120 / ZIP-100 devices. Access mode supports PIO Mode 4, Ultra DMA/33 and Ultra DMA/66

Mouse / Keyboard and Super I/O Ports

1.One PS/2 mouse connector and one PS/2 keyboard connector

2.Two high speed NS16C550 compatible serial ports (UARTs)

3.One SPP/EPP/ECP mode Bi-directional parallel port

4.One floppy disk control port

5.One HP-SIR, SHARP-IR compatible IR port. Consumer Remote Control supports RC-5, RC-6, NEC,

RCA and RECS 80 6.One digital game and MIDI (compatible with MPU-401 UART mode) port

3D Sound

AC97 Codec on board. For supporting 3D sound effect

VGA Interface

AGP VGA on chip (share memory)

TV-OUT(Optional)

One TV-OUT connector (TV-out daughter board is optional)

Cooling Fan Connectors

Three cooling fan connectors on board, two of them can be monitored by hardware monitoring

HARDWARE MONITORING (Optional)

Monitor up to ten independent system voltages, 3 temperatures, supports speaker alarm-beep during system abnormality

Dimension

4-layers PCB, 244mm x 220mm (small Micro-ATX Form-Factor, double-decker I/O connector)

Software Compatibility

MS-DOS, Windows NT, OS/2, NOVELL, Windows 95, Windows 98, CAD/CAM.... etc. fully tested