Socket478 for Intel Pentium4 and Northwood CPU

Chipset

82845 Memory Controller Hub (MCH) supports 400MHz FSB

82801BA I/O Controller Hub (ICH2) supports Ultra DMA 33/66/100 & 4 USB ports

iTE IT8712F I/O chip supports hardware monitoring & keyboard/mouse PowerOn

Memory

3 x 168-pin DIMM Socket supports up to 3GB

Support PC133 SDRAM

Audio (optional)

Creative Sound Blaster? PCI 128 4 speaker audio on board

128 voice PCI wave-table synthesis

Support Environmental Audio Extension (EAX), 3D Positional Audio, A3D

Support Microsoft DirectSound, DirectSound3D and DirectMusic

SPDIF output for PCM or compressed AC3 data

Expansion Slots

1 x CNR Slot

6 x PCI Slots

1 x AGP 4X/2X Slot

On-Board I/O Interface

2 x Ultra DMA 100/66/33 ports for four IDE devices

(Support CD-ROM, DVD-ROM, CD-R/RW, ZIP and LS-120 Drives)

1 x FDD of 360KB/720KB/1.2MB/1.44MB/2.88MB connector

1 x CPU fan connector, 1 x Chassis fan connector, 1 x Power Supply fan connector

1 x USB Header (for extra 2 USB ports with additional USB cable)

1 x IrDA Header

1 x CD / 1x AUX / 1xTAD

Back Panel I/O Ports

2 x USB Ports

1 x PS/2 Keyboard Port, 1 x PS/2 Mouse Port

1 x ECP/EPP Parallel Port, 2 x 16550A UART Serial Ports

1 x Game/MIDI port / 1x Line-In / 1x Line-Out / 1x MIC

Power Management(ATX power required)

ACPI (Advanced Configuration and Power Interface) V1.0

Power-on by Modem, LAN, Keyboard, Mouse, RTC Timer, Password and Hot key

Soft Power Off

Hardware Monitoring

CPU Voltage Detection

CPU/Chassis/Power Fan Spin-Speed Detection

CPU Temperature Detection

Bios

Firm Ware Hub (FWH) Award BIOS

Supports CD-ROM, SCSI, Floppy, LS-120, HDD, ZIP, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD and LAN Boot up

Supports APM, PnP, DMI

From Factor

ATX

Dimension: 30.5cm (12") x 21cm (8.26")