Aztech DSL
TurboRouter 9100R
The Aztech DSL9100R is a Controller-based External
ADSL WAN bridged modem/router with an in-built 4 port 10/100mbps switch.
It uses ST Microelectronics' Centaur solution for the ADSL WAN
connectivity that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt)
and G.992.2 (G.lite) ADSL standard. It supports Full-Rate ADSL
transmission at up to 8Mbps downstream and up to 640Kbps upstream.
Furthermore, the Aztech DSL9100R is interoperable with major DSLAMs and
support standard 10/100Base-TX Fast Ethernet interface cards.
PRODUCT SPECIFICATIONS
FEATURE
- ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and
G.992.2 (G.lite) compliant
- Using Discrete Multi-Tone (DMT) line encoding
scheme
- Full Rate transmission at up to 8 Mbps downstream
and 640 Kbps upstream
- G.lite transmission at up to 1.5 Mbps downstream
and 512 Kbps upstream
- Automatic Rate Adaptive Line Equalization at 32
Kbps steps
LAN
- Store and Forward Switch Architecture which
provides better integrity of data and prevents wrong order of packets
at the output ports.
- Provides 2Kbyte Frame Buffer Memory per port
- Offers 4 dual-speed 10Base-T/100Base-TX switch
ports
- Supports full-wire speed, full-duplex traffic on
every port simultaneously.
- Fully support IEEE 802.3 Ethernet and Fast
Ethernet
- Fully support IEEE 802.3u Auto-Negotiation which
provides automatic selection of transmission modes, half and full
duplex as well as transmission speeds, 10 mbps or 100 mbps
- Supports IEEE 802.1x Flow Control in Full Duplex
and Back Pressure for Half-Duplex.
Routing
- TCP/IP
- Static and Dynamic Routing (IP, RIP1 and RIP2
routing support)
- Network Address Translation (NAT)
- Port Address Translation (PAT)
- DHCP Server/Relay Agent
- DNS Relay Agent
Bridging
- Transparent Bridging (IEEE 802.1D)
- Supports self-learning Layer 2 Address Resolution
and has a storage capacity of 17K MAC addresses
Encapsulation
- RFC-2364 PPP over ATM PVCs
- RFC-1577 Classical IP over ATM PVCs
- RFC-1483 Bridged (Ethernet Over ATM)
- RFC-1483 Routed IP Over ATM
- RFC-2516 PPP over Ethernet Relay (Firmware
Upgradeable)
ATM Support
- ATM Transmission Convergence (TC) layer
- ATM Layer with Traffic shaping (UBR, CBR, VBR-nrt)
- AAL ATM Attributes - AAL0, AAL2, AAL5,
- OAM (I. 610) AIS/RDI Loopback, Continuity Check
and Performance Monitoring support
- Range of VPI (0-4095)
- Range of VCI (1-65,536)
- Multiple PVC Support up to 8
- UNI 3.0, 3.1 and UNI 4.0 ATM Signaling (support
for SVCs)
Configuration and Management
- SNMP support for management functionality
- Remote management through Telnet console access
(RS-232) port
- TFTP Software update
- Flash ROM upgradable for future feature
enhancement
- Multi-stand design allows for convenient and
flexible placing
- GUI Based Diagnostic Tool
Security
- Address Translation protecting Private LAN
address
- PAP/CHAP Authentication
- Management/Configuration Password control
- VPN Support : PPTP and L2TP (firmware upgrade)
- Packet Filtering (firmware upgrade)
System
- High Performance 48MHz ARM7 Based Network
Processor (96MIPS)
- 2 MB Flash Memory
- 8 MB SDRAM (Upgradeable to 16 MB)
External Interfaces
- 1 x RJ11 Telephone socket for ADSL line
- 1 x RJ11 Telephone socket for Telephone Handset
- 4 x RJ45 for 10/100Base-TX Ethernet (MDIX)
- 1 x 5V DC Power Connector
- 1 x On/Off Power Switch
- 9 pin Serial Port for local management
LED Indicators
- 1 x Power LED
- 4 x LAN Link/Activity Status LED
- 4 x LAN 100mbps Status LED
- 4 x LAN Collision LED
- 1 x ADSL Receive LED
- 1 x ADSL Transmit LED
- 1 x ADSL Link Status LED
Temperature
- Operating : 10o to 45 o Celsius 50 o to 113 o
Fahrenheit
- Non-Operating : -25 o to 70 o Celsius -13 o to
158 o Fahrenheit
Humidity
- Operating : 30% to 80% Relative Humidity
(Non-Condensing)
- Non-Operating : 10% to 95% Relative Humidity
(Non-Condensing)
Dimensions
- 210 mm (Length) x 154 mm (Width) x 45 mm (Height)
|