SIS 530 PENTIUM ATX MOTHERBOARD

SPECIFICATIONS

Chipset

SIS 530, 5595 and SMC669

CPU

INTEL : Pentium processor and OverDrive processor (P54C / P55C) 100 / 133 / 166/ 200 / 233MHz

CYRIX : 6x86 and 6x86L- P166+ / P200+

6x86MX-PR166 / PR200 / PR233 and MII-266 / 300 / 333 / 366

AMD : K5-PR100 / PR133 / PR166

K6 -166 / 200 / 233 / 266 / 300, K6-2 / 266 / 300 / 333 / 350 / 366 / 400 / 450 / 500

K6-3 / 400 /450 / 500

IDT : C6-200 / 225, WinChip2-200 / 233 / 266 / 300

CPU Voltage (Switching Regulator Support)

(1) CPU I/O Voltage:“+3.3V DC”, “+3.5V DC” (2) CPU CORE Voltage: +1.3V DC ~ +3.5V DC

System Clock

66 / 75 / 83 / 95 / 100MHz.adjustable

Memory

DRAM : Three banks, each bank could be single or double sided. Memory size up to 1.5GB,

supports SDRAM memory

SRAM : 512KB or 1MB pipelined burst SRAM on board

BIOS

256KB x 8 Flash ROM (AWARD Plug and Play system BIOS with DMI features)

Expansion Slots

PCI Slots : 32-bit x 4 (All Master/Slave, PCI2.1 Compliant)

ISA Slots : 16-bit x 3 (One slot PCI/ISA shared)

ACPI (for ATX power only)

1. Power on by panel-switch, or modem ring-in or LAN signal

2. Power off (Soft-off) by OS or panel-switch

3. Resume by several system events (such as modem ring-in, RTC alarm)

WOL (for ATX power only)

One WOL connector supports Wake-On-Lan

IDE Ports

Two channel of PIO and “Ultra DMA 33/66” synchronous mode PCI IDE ports, maximum 4 IDE hard disk and

ATAPI CD-ROM device can be connected. Supports PIO mode 4, DMA mode 2 and Ultra DMA 33/66

Super I/O Ports, Mouse and Keyboard

1. Supports PS/2 mouse connector, PS/2 keyboard connector (optional) and AT keyboard connector

2. Two high speed NS16C550 compatible serial ports (UARTs)

3. One SPP/EPP/ECP mode Bi-directional parallel port

4. One floppy disk control port

USB Ports

Two Universal Serial Bus (USB) ports

IR Port

One HPSIR and ASKIR or FasterIR (optional) compatible Infrared port

Onboard AGP VGA

Support 100MHz host interface to AGP VGA

Hardware Monitoring (optional)

1. Include Positive Voltage, CPU temperature (optional), and two fan speed monitoring

2. Supports LDCM (optional)

Dimension

4-layers PCB, 220mm x 220mm (small Baby-AT Form-Factor)

Software Compatibility

MS-DOS, Windows NT, OS/2, NOVELL, Windows 95, Windows 98, CAD/CAM.... etc. fully tested