Model:810DT+  
Chipset Vendor: Intel
Chipset Name: Whitney
Chipset Family: i810
Chipset Northbridge: 82810
Chipset Southbridge: 82801AA (ICH1)
CPU Type: Intel Pentium III Coppermine ; Intel Pentium III Katmai ; Intel Celeron ; Intel Celeron Coppermine
Socket / Slot Type: Socket 370
Memory Technology : SDRAM
Form Factor: baby-AT
Special: Twin processor ; AIR-Bus ; Front USB ; AZZA-UP Ready
PCI Slots: 4
ISA Slots:
AMR Slots: 1
CNR Slots:
USB Ports: 2
USB Location: bracket
AZZA Up Ready: AZZA-UP Ready
Audio Channels: 2
Audio Location: bracket
Audio AZZA Up Ready:
VGA AGP: AGP
VGA Type: onboard(bracket)
Status: production
The Best of Taiwan’s Best Awards, Summer ‘99

Best Motherboard Design

810DT+

INTEL 810 Socket 370 AT Motherboard

SPECIFICATIONS

With AIR Bus (AZZA Intelligent ROM Bus) built-in

Chipset

Intel 810 Chipset (82810, 82801AA, 82802AB)

Socket 370 CPU Platform

Intel Pentium III processor and Celeron processor CPU Voltage

Switching Voltage Regulator on board, supports +1.30V DC ~ +3.50V DC CPU Core Voltage

System Clock

66.6 MHz / 100 MHz / 133MHz (Auto detected)

Main Memory

Two 168-pin DIMM sockets, support 8MB up to 256MB (for DIMM module made by 16Mb/64Mb SDRAM chips) or 512MB (for DIMM module made by 128Mb SDRAM chips).Use 3.3V-Unbuffered SDRAM DIMM modules

BIOS

AWARD System BIOS. (Supports Plug & Play, ACPI, DMI and Green)

Expansion Slots

AMR Slot : One AMR slot for modem riser card

PCI Slots : 32-bit x 4 (All Master/Slave, PCI 2.1 Compliant)

ACPI Functions (For ATX power only)

1. System resumed by panel-switch, keyboard, PS/2 mouse, modem ring-in, LAN signal…

2. One LED for system operating status (S5, Soft Off ) indicating

WOL Connector (For ATX power only)

One WOL connector supports Wake-On-LAN (WOL up-designed)

USB Ports

Two Universal Serial Bus (USB) ports

SB-LINK Connector (Optional)

One SB-LINK feature connector to support some PCI sound cards for DOS games

IDE Ports

Two channel of Ultra DMA/66 Bus Master IDE ports, support up to 4 IDE Hard Disk, ATAPI CD-ROM and LS-120 / ZIP-100 devices. Access mode supports PIO Mode 4, Ultra DMA/33 and Ultra DMA/66

Mouse / Keyboard and Super I/O Ports

1.One PS/2 mouse connector and one AT keyboard connector

2.Two high speed NS16C550 compatible serial ports (UARTs)

3.One SPP/EPP/ECP mode Bi-directional parallel port

4.One floppy disk control port

5.One HP-SIR, SHARP-IR compatible IR port. Consumer Remote Control supports RC-5, RC-6, NEC, RCA and RECS 80

6.One digital Game and MIDI (compatible with MPU-401 UART mode) port

3D Sound

AC97 Codec on board. For supporting 3D sound effect

 

VGA Interface

AGP VGA on chip (share memory)

TV-OUT(optional)

One TV-OUT connector (TV-out daughter board is optional)

Cooling Fan Connector

Three cooling fan connectors on board, two of them can be monitored by hardware monitoring

HARDWARE MONITORING (Optional)

Monitor up to eight independent system voltages, 2 temperatures, supports speaker alarm-beep during system abnormality

Dimension

4-layers PCB, 220mm x 240mm (small Baby-AT Form-Factor)

Software Compatibility

MS-DOS, Windows NT, OS/2, NOVELL, Windows 95, Windows 98, CAD/CAM.... etc. fully tested

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我