Micro ATX, 400/533MHz FSB

Intel 845D+ICH2, DDR266, 2ch Audio,

Feature Highlights

Hardware CPU:Intel Pentium 4 Socket 478

System Frequency: 400/533MHz FSB

Chipset: Intel 845D+ICH2

Memory: (2) PC1600/2100 DDR DIMMs (2GB)

--------------------------------------------------------------------------------

Physical Form Factor:Micro ATX

Dimensions: 230mm x 244mm

--------------------------------------------------------------------------------

Expansion Internal upgrade slots: (3) PCI, (1) AGP, (1) CNR

IDE Bus: (2) UDMA-66/100 connectors

--------------------------------------------------------------------------------

AV Subsystems Video: 4X AGP

Audio: AC'97 Codec

--------------------------------------------------------------------------------

CPU Supports the Intel Pentium 4 Socket 478 CPU

Supports the Intel Pentium 4 System bus at 400/533MHz

--------------------------------------------------------------------------------

Chipset Intel 845D+ICH2

--------------------------------------------------------------------------------

Main Memory Two 184 pin DDR DIMMs up to 2GB

Supports PC1600/2100 DDR SDRAM modules

--------------------------------------------------------------------------------

Expansion Slots One 1.5V AGP slot for 4X AGP (v2.0 compliant)

Three 32-Bit PCI slots (v2.2 compliant)

One CNR slot support modem, audio and LAN riser

--------------------------------------------------------------------------------

Audio Subsystem With external high quality AC'97 Codec

Complete software driver supports for Windows OS

--------------------------------------------------------------------------------

Video Subsystem Video : 4X AGP

--------------------------------------------------------------------------------

UltraDMA IDE Ports Supports PIO Mode 4 up to 16.6 Mbps, Multi-Word DMA Mode 2and Ultra DMA mode 5 up to 100MB/s with Bus Mastering

Bus-Mastering software drivers for all common multi-tasking

operating systems

--------------------------------------------------------------------------------

Embedded USB Controller UHCI compliant USB host controller with Root hub

Four USB ports (UHCI v1.0 compliant) with over-current protection

Optional USB adapter for additional USB ports

--------------------------------------------------------------------------------

On Board Super I/O Controller Three UARTs support serial ports and IR function (up to 115.2Kbps) for HPSIR and ASKIR

One SPP/ECP/EPP parallel port

One floppy disk drive connector supports up to 2.88MB

Integrates smart card reader function and interface, to be qualified for meeting PC/SC standard

--------------------------------------------------------------------------------

Embedded system monitoring 8 external voltage inputs

1 temperature sensing for CPU

2 Fan speed (CPU and system) monitoring with on/off control in suspend

--------------------------------------------------------------------------------

Boot-Block Flash ROM Award system BIOS support PnP, APM, DMI, ACPI, & Multi-device

booting features

--------------------------------------------------------------------------------

Software Driver CD (Chipset Autodetect)

--------------------------------------------------------------------------------

Other Feature Back panel I/O connector

One PS/2 mini-DIN mouse and keyboard port

Two USB Ports

Two 9-pin D-SUB male Serial port

One 25-pin D-SUB female parallel port

Audio Line-in, Line-out and Mic-in jack

One 15-pin D-SUB female game/MIDI port

On board connector for external device

Two 3x1 pin fan connector

5x2 pin two USB ports connector for front side USB

6x2 pin Infrared connector

3x1 pin wake on LAN connector with housing

5x1 pin alarm on LAN connector

4x1 pin CD-in connector with 2.54mm pitch housing

4x1 pin Aux-in connector with 2mm pitch housing

4x1 pin Mono-in connector with 2mm pitch housing

9x2 pin front side audio connector

9x2 pin front panel connector

7x2 pin Smart Card Reader connector

17x2 pin floppy connector