DM-10790-1 |
|
Processor |
-
Intel®
Pentium® , Cyrix® 6x86/ 6x86L/ 6x86MX/ MII, AMD®
K5/K6/K6-2/K6-3, IBM® 6x86/ 6x86L/ 6x86MX, IDT WinChip C6 (66, 75,
83, 100MHz Front Side Bus).
-
166/180/200/233/266/300MHz
or above.
-
Intel®
Pentium® Processors with MMX®
Technology.
-
Socket
7 CPU Upgradability.
|
Chip Set |
|
BIOS |
-
1M
Flash EPROM (Support PnP, APM, ACPI, ATAPI, DMI).
-
IDE
AUTO LBA Mode Supports HDDs over 8.4GB.
-
Anti-Virus
Protection.
|
Cache |
- L2 Cache is CPU Built-in.
|
Memory |
-
8MB
to 256MB.
-
Two
168-pins DIMMs (64bit) and Two 72-pins Standard SIMMs (32bit).
-
Fast
Page Mode, Extended Data Output (EDO) and Synchronous DRAM (SDRAM).
-
DIMMs
Depth of 1MB, 2MB, 4MB, 8MB and 16MB.
-
SIMMs
Depth of 512KB, 1MB, 2MB, 4MB and 8MB.
|
On Board I/O |
-
Support
two PCI Enhanced IDEs PIO Mode 3, Mode 4 and “Ultra DMA 33”Mode
HDDs. Twin Headers for Four IDE Devices Including IDE HDDs and CD
ROMs.
-
Support
Two FDDs of 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB.
-
One
ECP/EPP Parallel Port. Two 16550A UART Serial Ports. Two USB Ports
(Optional Adapter Cable). One PS/2 Mouse Port (Optional Adapter
Cable).
-
One
IrDA Port (Optional TX/RX Module).
|
Expansion Slot |
-
Two
ISA Bus Slots (One PCI Shared Slot).
-
Three
PCI Bus Slots (One ISA Shared Slot).
-
One
Accelerated Graphics Port (AGP).
|
Plug and Play |
-
Plug
and Play Specification 1.1.
-
Plug
and Play for DOS®, Windows® 3.x, and Windows® 95/98.
|
PC97/98 |
|
Power Management |
|
PCI |
|
AGP |
|
Battery |
- On-board Lithium Battery.
|
Board Size |
- 220mm x 190mm, Baby AT Form Factor.
|
|