| DM-10790-2 |
 |
| Processor
|
- Pentium® and
Pentium® MMX processors.
- AMD® K5/K6/K6-2/K6-2+/K6-III
processors.
- Cyrix® / IBM®
6x86/6x86L/6x86MX/ M II processors.
- IDT® WinChip C6 processors.
- Support 66, 75, 83, 95 &
100MHz Bus Clock.
- 100/133/166/180/200/233/300/350/400/450/475/500/533MHz
or above (Socket 7)
|
| Chip
Set |
|
| BIOS |
- 1MB or 2MB Flash EPROM (Support
PnP, APM, ATAPI & Windows®
9x).
- IDE AUTO LBA Mode ,
Supports HDDs over 8.4GB.
- Anti-Virus Protection.
|
| External
Cache |
- Direct Mapped L2 Write Back
Cache.
- 512KB On-board Synchronous
Pipelined Burst SRAM.
|
| Memory |
- Two 168-pins DIMMs (64bit) and
Two 72-pins Standard SIMMs (32bit).
- DIMM Memory size from 8MB to
256MB.
- RIMM Memory size from 8MB to
128MB.
- Fast Page Mode, Extended Data
Output (EDO) and Synchronous DRAM .
- DIMMs Depth of 1MB, 2MB, 4MB,
8MB, 16MB and 32MB.
- SIMMs Depth of 512KB, 1MB, 2MB,
4MB, 8MB and 16MB.
- Banks of different DRAM types and
depths can be mixed.
|
| On
Board I/O |
- Two PCI Enhanced IDEs PIO Mode 3,
Mode 4 and Ultra DMA 33 Mode Channels.
Twin Headers for Four IDE Devices Including IDE HDDs and CD-ROMs.
- Support Two FDDs of 360KB, 720KB,
1.2MB, 1.44MB or 2.88MB.
- One ECP/EPP Parallel Port.
- Two 16550A UART Serial
Ports.
- Two USB Ports
(via a header).
- One PS/2 Mouse Port (via a
header).
- One standard AT keyboard
port (factory option for PS/2 type).
- One IrDA Port (via a header).
|
| Expansion
Slot |
- 1 AGP Slot (ver.1.0, 1x/2x mode
supported).
- 3 PCI Bus Slots (rev.2.1
compliant, 1 ISA Shared Slot).
- 2 ISA Bus Slots (1 PCI Shared
Slot).
|
| Plug
and Play |
- Plug and Play Specification 1.1.
- Plug and Play for DOS®,
Windows® 3.x, and Windows® 95/98.
|
| PC97/98 |
|
| Power
Management |
- Support SMM & APM and ACPI.
- Break switch for instant suspend/resume on
system operation.
- Comply to Energy Star “Green PC”
Program.
|
| PCI |
|
| AGP |
|
| Battery |
- On-board Lithium Battery.
|
| Board
Size |
- 220mm x 186mm, Baby-AT Form
Factor.
|
|
