KA11 |
- FSB @
66~150
MHz
- Voltage
1.5x-3.5V @0.05V step
- Clock
Ratio 3.5x-7.5x select by DIP Switch
- Select FSB frequencies from BIOS
- UDMA 66 support
- AGP
4X mode support
|
| Processor |
- Intel® Pentium®
III 450-733** MHz @ 100/133MHz FSB
- Intel® Pentium®
II 233-450 @ 66/100MHz FSB
- Intel® CeleronTM
266-433+MHz @ 66MHz FSB
- Intel® CeleronTM
PPGA 300-533+MHz @ 66/100MHz FSB (via CPU converter card)
|
| Chipset |
- North : VIA Apollo Pro 133A
- South : VIA 596B
|
| Memory |
- 4 DIMM
- up to 1GB SDRAM
- ECC memory support
|
| Onboard
Audio |
- Creative CT5880 +
Sigmatel 9708 (mfg. option)
|
| Bus
Frequency |
- 66/75*/83*/100/103*/112*/124*/133/140*/150
*
|
| Onboard
I/O Connectors |
- 2 USB
- 1 parallrel port with ECP/EPP
- 1 PS/2 mouse and keyboard connector
- 1 media connector (MIDI/game port, Line-in, Line-out, Mic-in)
- 2 serial port with UART 16550
|
| Onboard
PCI IDE |
- 2 dual-channeled enhanced PCI Bus Master IDE connectors
- Ultra DMA 33/66 ; DMA Mode 2/4 support
|
| Expansion
Slots |
|
| BIOS |
- 2Mb flash ram
- ACPI 1.0
- APM 1.2 / PnP 1.0a / SMBIOS 2.1 / DMI 2.0 / WfM 1.1a
- Select Ratio and FSB frequencies from BIOS
|
| Protection
& Management |
- Hardware Monitoring (mfg.option)
Wake on Lan/ Wake on Ring/ Power fail
- On board temperature, fan failure monitoring
- Remote control management
- S.M.A.R.T. support
|
| Advanced
Features |
- NOVUS:
| -
AudioAlert |
| -
BIOS Guardian |
| -
EasyKey |
| -
Overclock Partner |
| -
LogoGenie |
| -
ClockoMeter |
|
| Form
Factor |
- ATX
- 8.2" x 12 " (208.2mm x 304.8mm)
|
| Package
Contents |
- 1 motherboard
- 1 manual
- 1 CD-PRO
- 1 CD-PLUS
- 1 ATA66 Cable, 1 ATA33 IDE Cable and 1 FDD Cable
- 1 update driver floppy disk
|
| Additional
info. |
supported but
not warrantied by FIC
** not yet tested
specifica tion subject to change without notice
|
