DF-1156IV/R3
|
 |
Chipset :
Rockwell RC56HCF
Main Features:
- Data / Fax / Voice/FDSP
- Call progress, Blacklisting options
- Caller ID and distinctive ring detect
- Single profile stored in host
- Support Windows 95 / 95 OSR2, Windows 98, Windows NT 4.0 / 5.0,
Microsoft's PC 97, Unimodem/V compliant
- ACPI Power Management Registers
- PME# and APM support
- Design compliant with FCC part 15, part 68 and DOC for EMI and
Safety standard.
Data Interface : PCI
Line Interface : Two RJ11 phone
jacks
Modem Function :
- Full duplex transmission
- Asynchronous communication data mode
- ITU-T V.90, K56flex, V.34(33.6 kbps), V.32bis, V.32, V.22 bis,
V.22 V.23 and V.21; Bell 212A and 103
- V.42 LAPM and MNP 2-4 error correction
- V.42 bis and MNP 5 data compression
- V.25 ter (Annex A) and EIA/TIA 602 command set
- DTE to Modem Data Rate: Up to 300, 1200, 2400, 4800, 9600, 14400,
19200, 28800, 38400, 57600, 115200 bps.
- Line Data Rate: 300, 1200, 2400, 4800, 9600, 14400, 16800, 19200,
21600, 24000, 26400, 28800, 33600, 56000 and 1200/75 bps
Fax Function:
- Half duplex transmission
- G3 Fax Modes : V.17 / V.29 / V.27 ter / V.21channel 2
- EIA / TIA 578 Class 1 and T.31 Class 1.0 commands Voice Function
- TIA-695 command set
- TAM support with concurrent DTMF detect, ring detect and caller ID
- 4 pin header connect to sound card
- V.80 synchronous access mode supports host-controlled
communication protocols
- H.324 interface support
- V.8 / V.8bis and supporting AT commands (V.25 ter with Annex A)
|
|
