F845DA Pentium 4 Motherboard
     
    
    --------------------------------------------------------------------------------
    
    Picture N/A Key Features 
    ATX form factor 
    Intel 845+ICH2 
    Support Intel P4 processor 
    Support maximum 2GB DDR266 SDRAM with 2 DIMMs 
    Support one 1.5V AGP 4X slot 
    Support 6 PCI slots and 1 CNR slot 
    Support USB 1.1 four ports 
    Realtek 8100B LAN on board option 
    
    CPU 
    - Supports Intel? Pentium? 4 processor in 478 pin package.
    - Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz,2GHz, 2.1GHz, 2.2GHz 
    and up.
    
    Chipset
    Intel? 845 (593 FC-BGA) Chipset
    - Supports DDR SDRAM at 200/266MHz operation (DDR200/DDR266).
    - AGTL+ host bus with integrated termination supporting 32-bit host 
    addressing.
    - 1.5V AGP interface with 4x data transfer and 4x fast write capability.
    - 8-bit, 66MHz 4x hub interface to the Intel ICH2.
    Intel? ICH2 (360 EBGA) Chipset
    - Upstream hub interface for access to the Intel MCH.
    - 2-channel Ultra ATA/100 Bus Master IDE controller.
    - USB controller 1.1 (expanded capabilities for 4 ports).
    - I/O APIC.
    - SMBus controller.
    - FWH interface.
    - LPC interface.
    - AC'97 2.1 interface.
    - PCI 2.2 interface.
    - Integrated system management controller.
    
    FSB
    - Support 100MHz FSB
    - Support 400MHz Intel NetBurst micro-architecture bus.
    
    Main Memory
    - Supports four memory banks 184-pin 2 DDR DIMMs.
    - Supports up to 2GB PC2100/PC1600 DDR SDRAMs.
    - Supports 2.5v DDR SDRAM.
    
    Slots
    - One AGP (Accelerated Graphics Port) 4x slot (1.5V only).
    - Six PCI 2.2 32-bit Master PCI bus slots (support 3.3V/5V PCI bus 
    interface).
    - One CNR (Communication Network Riser) slot.
     
    NOTE : If plugging in 3.3v AGP card system won't be powered on.
    
    On-Board IDE 
    - An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with PIO,
    
    Bus Master and Ultra DMA66/100 operation modes.
    - Can connect up to four IDE devices.
    
    Audio
    Realtek ALC201A AC-97 2.1 Codec on board.
    
    On-Board Peripherals
    On-Board Peripherals include:
    - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 
    2.88Mbytes.
    - 2 serial ports (COM A + COM B).
    - 1 parallel port supports SPP/EPP/ECP mode.
    - 1 IrDA connector for SIR/ASKIR/HPSIR.
    - 1 Audio/Game port. 
    - 4 USB ports (2 on board, 2 extendable). 
    BIOS
    - The mainboard BIOS provides "Plug & Play" BIOS which detects the 
    peripheral devices. 
    and expansion cards of the board automatically.
    
    Dimension
    30.5 cm(L) x 22 cm(W) ATX Form Factor.
    
    Special Options
    Realtek 8100B on board option.