MP-S8D-2
SiS 645 Pentium4 ATX Mainboard
Intel Socket 478 Pentium4 400MHz FSB(100MHz x 4 Quad-Pump)
SiS 645 (A2)
DDR333, DDR266, DDR200 RAM
6 PCI Slot, AGP 4X Slot, ATX 2.03
SPECIFICATION
Processor
Socket478 for Pentium4 Processors.
Support 400MHz Front Side Bus.
CPU Voltage Autodetect Circuit.
Hardware Monitor CPU Overheat Protect System.
On-Board 2 x Ultra DMA 33/66/100 IDE Ports.
Support Suspend-to-RAM Function(STR).
Modem Ring Power-on Function.
Chipset
SiS S645 North Bridge.
SiS 961 South Bridge.
ITE 8705F Chip.
Avdance AC'97 codec.
Memory
Support DDR333 (PC2700) x2, DDR266 (PC2100) x3, DDR200 (PC1600) x3.
184pin DIMM sockets x 3.
64MB to 2GB (PC1600 / PC2100 / PC2700 DDR).
Expansion slot
PCI x 6 (Rev 2.2).
AGP x 1 (Rev 2.0) support 1x,2x,4x mode.
Sound controller
Onboard Advance AC'97 digital audio controller.
Sound blaster hardware and direct sound ready.
1 x joystick, 1 x Line-in, 1 x Line-Out, 1 x MIC, 1 x CD audio-IN port.
I/O Ports
2 x UltraDMA 33/66/100 Master mode PCI EIDE ports.
2 x IDE RAID Controller Support RAID 0 or RAID 1.
1 x FDD (Support 1.2/1.44/2.88 MB for 3.5 inches FDD and 360KB/1.2MB for
5 inches FDD).
2 x COM (UART 16C550 compatible).
1 x LPT (SPP/ECP/EPP supported).
PS/2 Keyboard, PS/2 Mouse onboard.
4 x USB ports (USB 1.1 and Intel Universal HCI v1.1 compatible).
IrDA connector ready.
Power
ATX power connector.
Power-on by Modem.
Power-off by switch, Windows 9x/2000 shut down.
Suspend / wake-on by ACPI and APM device,
Support ACPI Suspend to RAM
From Factor
ATX from factor, 4 layers PCB.
Size ATX 30.5CM(H) x 24.4CM(W).
Hardware Monitor
Programmable control, status, monitor and alarm for flexible desktop
management (software include).
Two temperature monitoring.
Three fan speed monitoring,
BIOS
2Mbit flash RAM.
AMI BIOS.
CPU Anti-Burn Shield.
IDE#1-#4, SCSI, LS-120, ZIP and CD-ROM bootable.
Support Plug & Play V1.0, enhanced ACPI feature.
Flash memory for easy upgrade.
Support BIOS writing protection.