VIA P4X266 ATX Mainboard

Features:

VIA P4X266 chipset.

Support Intel Pentium 4 CPU, Using Socket478.

Support 400 MHz (100MHz x 4; Quad-Pump).

Support FSB 133MHz by 1MHz step.

Support AGP 1x, 2x, 4x.

CPU Voltage Autodetect Circuit.

Support BIOS Core Voltage setting.

Provides dipswitch/Jumperless setting.

Onboard AC'97 Audio Controller.

Onboard Promise IDE RAID Controller (Support IDE RAID 0 or RAID 1)

Built-in CNR Slot.(Communication Networking Riser).

On-Board 2 x Ultra DMA 33/66/100 IDE Ports.

Support ATX S/W Power-off Function.

Support DMI, ACPI Function.

Support 6 USB Port.

KB,MOUSE Power-on Function.

Support Suspend-to-RAM Function(STR).

Support Wake on Lan Function.

Modem Ring Power-on Function.

8VIP-Pro Specification

Specification

Board Size, Form Factor ATX Size 305mm x 245mm.

CPU -Intel Pentium 4, CPU Using Socket478.

-Support 400 MHz (100MHz x 4; Quad-Pump).

-Support BIOS CPU Core Voltage Setting (1.1v-1.85v)

-CPU Voltage Autodetect Circuit.

System Memory -DDR 184pin DIMM x 3.MAX 3GB

Expansion Slots -1 AGP Slot Support 4x (Rev 2.0),

-6 x PCI ( Rev 2.2 )

-1 CNR(Communication Networking Riser).

Sound -Onboard AC'97 Audio Controller.

-Provides Line-In,MIC-In,Speaker/Line-Out Port and Joystick/MIDI Port.

Serial Port -2 serial ports. (UART 16C550 compatible).

Parallel Port -1 parallel port. (SPP/ECP/EPP supported)

Floppy Interface -1 Floppy Drive Connector (1.2/1.44/2.88 MB for 3.5 inches FDD) ( 360KB/1.2MB for 5 inches FDD)

IDE Interface -Dual-Channel IDE interface.

( LS120, IDE ZIP, UDMA 33/66/100 supported.)

-Promise IDE RAID Controller (Support IDE RAID 0 or RAID 1).

USB Interface -4 USB Ports,(2 onboard/2 optional).

Infrared Interface Connector -Optional Infrared module.

PS/2 Port -PS/2 Mouse and Keyboard connector onboard.

BIOS -Award Plug-and-Play 2M bit Flash ROM BIOS.

Wake On Lan -Special circuit to support Wake On Lan function.

KB/Mouse Power-on -Special circuit to support KB/MOUSE Power-on.

Modem Wake UP -Special circuit to support modem ring up by external modem.

Suspend To RAM(STR) -Special circuit to support Suspend-To-RAM.