|
Rhino P4M266L-M4E
|
 |
|
Chipset |
VIA P4M266 + VT8233 |
| CPU
Socket |
Socket 478 |
| CPU
Supported |
- Intel Pentium 4
- 400 MHz Data Bus |
| AGP
Bus |
4X AGP |
| On
Board VGA |
Savage 4
AGP Compliant.
- Transfer Rate up to 533MB/sec.
- 64-bit Single Cycle 2D/3D Graphic Engines.
- Support 4 to 8MB Frame Buffer Shared with System
Memory.
- Integrated 24-bit 230MHz RAMDAC.
- Resoluction up to 1600 x 1200.
- DirectX6 & OpenGL API. |
|
Memory |
- 2 x 168pins DIMM Socket
- Support up to 512MB SDRAM |
| Slot |
2 x PCI, 1x AGP (4X) |
| I/O |
- 2 IDE ports supporting up
to 4 ATA2 (UDMA33/UDMA66/UDMA100) IDE HDDs, CD-ROMs, ZIP devices and LS-120
drives as boot drive.
- Supports bus master IDE, PIO mode 4 (up to 16M bytes/sec) and
UDMA33/66/100 transfer mode.
- 1 x ECP/EPP parallel port
- 2 x 16550-compatible UART serial ports.
- One floppy port supporting two FDDs of 360KB, 720KB, 1.2MB, 1.44MB and
2.88MB formatted capacity
- 2 x USB ports
- PS/2 Keyboard port and mouse port
- Infrared IrDA Connector
- 1 x Line/Speaker out, 1x Mic in, 1 x Line in and MIDI / Gameport |
|
Hardware Monitoring |
FAN speed, CPU Temperature,
CPU and I/O Voltage |
|
Audio on board |
- On chip 18bit Audio
Controller with independent variable sampling rate
- PnP, Full Duplex, Sound Blaster Pro, Direct Sound Ready |
| LAN
on board |
NS 10/100m Lan. |
| BIOS |
- CPU Speed Jumpless
- Support SMM, APM and ACPI
- 2MB Flash memory for on-board programming
- Wake-On-LAN/Modem Ring, Alarm resume |
|
Software bundle |
- PC-Cillin Anti-virus
software |
|
Board Size |
244mm x 225mm uATX Form
Factor |
