R686CH Motherboard |
|
Processor
: |
Supports
Socket 370 processors. |
Chipset
: |
VIA
(VT8604+VT82C686A), CPU Clock Support (66/100/133 MHz) |
Expansion
Slot : |
PCI
Slot x 1 (for 2 slots Riser Card). |
System
Memory : |
Supports 2 x
168-pin DIMM Sockets (2 Banks)
-The Memory from 32MB up to 1GB (SDRAM) |
On
Board IDE : |
2
x IDE Connectors for up to 4 IDE Drives.
-PIO Mode 4 transfers
-Support Ultra DMA 33/66 ( Can use 2.5" or 3.5" HD )
|
On
Board I/O : |
2 Serial Port
Connectors (16550 Fast UART compatible).
-1 Parallel Port Connectors (EPP/ECP capability).
-1 Floppy Disk Connector.
-1 PS/2 Mouse Connector.
-1 PS/2 Keyboard Connector.
-1 IrDA Connector. |
On
Board USB : |
Universal
Serial Bus Controller.
-Host / HUB Controller.
-Four USB Port + 2 USB connectors.
|
On
Board VGA : |
Built-in S3
Savage 4TM AGP 4X 3D and Savage 2000 2D Graphics engine shared memory to
8/16/32MB, On Board LCD connector. |
On
Board TV-Out : |
Built-in
CHRONTEL 7009 chip (S-VIDEO & RCA jack output).
Resolution : 640x480, 800x600, 1024x768. |
On
Board Sound : |
Built-in VIA
1611 codec chip. (AC'97) |
On
Board LAN x 2 : |
Two LAN
ports, built-in RTL8139C 10/100 Mbps PCI Lan chip. |
Watch
Dog : |
Can
be set by 500ms, 1, 2, 4 seconds period.
RESET or NMI was generated when CPU did
not periodically trigger the timer.
|
Disk
On Chip : |
100%
Hard Disk and DOS compatible, no need extra
software utility. One 32-pin socket only. Capacity
is from 2MB to 512MB.
|
BIOS
: |
Flash ROM
BIOS with Green, Plug and Play Features. |
Dimension
: |
Special
Form Factor Size.
23cm x 22cm or 9.1" x 8.7" (4 Layers)
|