● Intel 845D (i845E MCH+ 82801DB ICH2)
i845D MCH:
- Supports Socket 478 Processor @ 400MHz FSB
- Supports DDR 266/200 SDRAM
- AGP 4X Interface (1.5 V AGP 4X only)
- Features 400 MHz Front Side Bus settings
- Supports 64Mb, 128Mb, 256Mb and 512Mb technologies for x8 and x16
devices
82801DB ICH2:
- 2 channel Ultra ATA-100/66/33 bus
- 4 x USB 1.1 ports (max.)
- AC'97 interface
- PCI 2.2 interface
- LPC interface
Memory
● 2 x 184-pin DDR DIMM Sockets
● Supports up to 2GB (with 512-Mb technology) DDR SDRAM memory space
● PC 2100 compliant
Cache Memory
● Built-in to Processor Module
On-Board EIDE
● 2 x UATA 100/66/33 IDE ports (up to 4 ATAPI Devices)
● Supports for PIO Mode 3, 4, UATA 100/66/33 IDE & ATAPI CD-ROM
Integrated Super I/O
● 1 x Floppy Port (supports 360K, 720K, 1.2M, 1.44M and 2.88Mbytes)
● 2 x serial ports (high-speed 16550A FIFO UART Ports)
● 1 x Parallel Port with EEP/ECP/SPP Capabilities
● 1 x PS/2 Mouse, 1 x PS/2 Keyboard connectors
● 4 x USB 2.0 Ports (two via optional cable)
● 1 x Audio/Game Port
Expansion Slots
● 1 x AGP 4X Slot (AGP 4X only)
● 3 x 32-bit PCI Bus Master Slots
Form Factor
● Micro ATX Form Factor (230mm x 245mm)
BIOS
● AMI Plug-and-Play BIOS
● Supports Advanced Power Management Function
● Flash Memory for easy upgrade
Other Features
● BIOS FSB Setting ● Ultra ATA 33/66/100
● BIOS Writing Protection ● PC 2100 compliant
● SmartDoc. Anti-burning Shield ● H/W Monitor
● RedStorm Overclocking Technology (optional) ● Integrated AC-97 Audio
function
● An additional Peripheral Power Connector *
SL-85DIR adopts an additional Peripheral Power Connector (the power
connector that HDD adopts). Users who installed already an ATX2.03 compliant
power supply can use the +12V power Connector designed specially for P4
mainboard. For those who use a non ATX2.03 compliant Power Supply (for
example, users that upgrade their mainboards from PIII to P4), they can take
advantage of the Peripheral Power connector instead of buying a new P4 Power
Supply. This design helps users reduce the cost when upgrade their systems.
* For P4 processors faster than 2GHz, we suggest users adopt the ATX 2.03
compliant Power Supply.
●
