| SL-85DRS2
 |
|
Processor |
|
● Intel Socket
478 Pentium 4 (400MHz FSB) |
| |
|
Chipset |
● SiS 645 (SiS
645 NorthBridge A2 version+
SiS961 MuTIOL® Media I/O)
SiS 645 :
A2 version
|
-
702 BGA
- Supports Socket 478 P4 Processor
- Enhanced Performance
- DDR333/266 Memory Controller
- AGP 4X/2X
- Features 400 MHz Front
Side Bus settings
- Synchronous/Asynchronous Host-t-DRAM Timing |
| |
|
SiS961:
|
- 533MB/s bandwidth in
66MHz x 4 Mode
- Dual IDE Channels with ATA 100/66/33
- Support AC'97 V2.2 Audio Codec and Modem Codec
- Support for six USB Ports (max.)
- Support Up to 6 PCI Masters |
|
| |
|
Memory |
● 3 x 184-pin DDR DIMM
●
Supports up to 2 un-buffer DIMM DDR333 or up to 3 un-buffer Double-sided
DIMM DDR266/200
● Up
to 1 GB per DIMM with max. memory size up to 3GB |
| |
|
Cache Memory |
|
● Built-in to Intel Pentium 4
Processor Module |
| |
|
On-Board EIDE |
● 2 x PCI Bus Master UATA
100/66/33 IDE ports (up to 4 ATAPI Devices)
●
Supports for PIO Mode 3, 4, UATA 100/66/33 IDE & ATAPI CD-ROM
|
| |
|
Integrated Super I/O |
● 1 x Floppy Port (supports
360K, 720K, 1.2M, 1.44M and 2.88Mbytes)
● 2
x serial ports (high-speed 16550A FIFO UART Ports)
● 1
x Parallel Port with EEP/ECP/SPP Capabilities
● 1
x PS/2 Mouse, 1 x PS/2 Keyboard connectors
●
4 x USB Ports (two via optional cable)
●
1 x Audio/Game Port |
| |
|
Expansion Slots |
● 1 x AGP 4X Slot
● 6
x 32-bit PCI Bus Master Slots |
| |
|
Form Factor |
|
● ATX Form Factor (225mm x
305mm) |
| |
|
BIOS |
● AMI Plug-and-Play BIOS
●
Supports Advanced Power Management Function
●
Flash Memory for easy upgrade |
| |
|
Other Features |
|
●
BIOS FSB Setting |
●
Ultra ATA 66/100 |
|
●
BIOS Vcore setting |
●
DIMM Voltage Setting |
|
●
BIOS Writing Protection |
●
H/W Monitor |
|
●
SmartDoc. Anti-burning Shield |
●
Integrated AC'97 Audio function |
|
●
RedStorm Overclocking Technology |
●
RedLighting Design |
● An additional
Peripheral Power Connector *
SL-85DRS2 adopts an additional
Peripheral Power Connector (the power connector that HDD adopts). Users
who installed already an ATX2.03 compliant power supply can use the +12V
power Connector designed specially for P4 mainboard. For those who use a
non ATX2.03 compliant Power Supply (for example, users that upgrade their
mainboards from PIII to P4), they can take advantage of the Peripheral
Power connector instead of buying a new P4 Power Supply. This design helps
users reduce the cost when upgrade their systems.
* For P4 processors faster than 2GHz, we
suggest users adopt the ATX 2.03 compliant Power Supply.
|
