Main Features

● VIA P4M266 chipset

● FSB 400 MHz

● Supports DDR266/200 SDRAM

● Integrated S3 Graphics ProSavage8 with additional AGP4X/2X connector

● Supports Ultra ATA 133/100/66

● BIOS FSB Setting

● On-board AC'97 Audio Function

● Integrated Realtek RTL8139C LAN Controller

● An additional Peripheral Power Connector to reduce the cost of upgrading an old system.●

Specification

Processor

● Intel Socket 478 Pentium 4 (400MHz FSB)

Chipset

● VIA P4M266 (VT8751+ VT8233A)

VT8751:

- 664-pin BGA

- Supports Socket 478 P4 Processor

- Supports DDR266 SDRAM

- Integrated S3 Graphics ProSavage8

- External AGP 4X/2X Interface support

- Features 400 MHz Front Side Bus settings

- PC-2100/1600 Compliant

VT8233A:

- 376-pin BGA

- Supports Ultra ATA-100/66/33 transfer protocol

- Provides AC'97 Audio

- Support for four USB Ports (max.)

Memory

● 2 x 184-pin DDR DIMM

● Supports up to 2GB (with 512-Mb technology) DDR266 SDRAM memory space

● PC 2100/1600 compliant

Cache Memory

● Built-in to Intel Pentium 4 Processor Module

On-Board EIDE

● 2 x PCI Bus Master UATA 133/100/66 IDE ports (up to 4 ATAPI Devices)

● Supports for PIO Mode 3, 4, UATA 133/100/66 IDE & ATAPI CD-ROM

Integrated Super I/O

● 1 x Floppy Port (supports 360K, 720K, 1.2M, 1.44M and 2.88Mbytes)

● 2 x serial ports (high-speed 16550A FIFO UART Ports)

● 1 x Parallel Port with EEP/ECP/SPP Capabilities

● 1 x PS/2 Mouse, 1 x PS/2 Keyboard connectors

● 1 x VGA Port

● 1 x LAN Connector Rj45

● 4 x USB Ports (two via optional cable)

● 1 x Audio/Game Port

Expansion Slots

● 1 x AGP 4X Slot (AGP 4X only)

● 3 x 32-bit PCI Bus Master Slots

Form Factor

● Micro ATX Form Factor (245mm x 245mm)

BIOS

● AWARD Plug-and-Play BIOS

● Supports Advanced Power Management Function

● Flash Memory for easy upgrade

Other Features

● BIOS FSB Setting ● PC 2100/1600 compliant

● BIOS Writing Protection ● Integrated AC-97 Audio Audio function

● Ultra ATA 66/100/133 ● Integrated LAN Controller

● An additional Peripheral Power Connector *

SL-85MIV-L adopts an additional Peripheral Power Connector (the power connector that HDD adopts). Users who installed already an ATX2.03 compliant power supply can use the +12V power Connector designed specially for P4 mainboard. For those who use a non ATX2.03 compliant Power Supply (for example, users that upgrade their mainboards from PIII to P4), they can take advantage of the Peripheral Power connector instead of buying a new P4 Power Supply. This design helps users reduce the cost when upgrade their systems.

* For P4 processors faster than 2GHz, we suggest users adopt the ATX 2.03 compliant Power Supply.

●