| CPU Support: Socket 478
Intel Pentium 4 in the 478 pin package
Chipsets: Intel 845
(North) Brookdale MCH Hub:
Support Pentium 4 System bus
Support PC133 SDRAM interface
Support AGP interface
Support Hub interface to ICH2
Support ACPI 1.0b compliant power management
Support APM 1.2 compliant power management
(South) ICH2:
Support UDMA 33/66/100 IDE interface
Support USB interface
Support ACPI 1.0b compliant power management
Built in RTC (Real Time Clock)
Supports PCI interface
Form Factor
ATX
Memory
3 x 168 pin SDRAM Socket
Support PC133 compliant un-buffer / ECC SDRAM up to 3GB capacity
Onboard H/W Audio: C-Media 8738 PCI-6CH/LX
Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode
HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface
Legacy SBPRO compatible
Expansion Slot: 1 x AGP 2.0 compliant slot
Support external AGP V2.0 compliant VGA device
Support 1.5V AGP electrical only
Support 1X, 2X, 4X AGP data transfer
5 x PCI slots
PCI 2.2 compliant, 32-bit BUS Master Slots
133 Mbyte / sec maximum throughput
IDE interface: On board Promise 265R (AB30R Only)
2 x UltraDMA/100 Bus Master IDE from ICH2
2 x UltraDMA/100 Bus Master IDE from promise 265R to support RAID 0,
RAID1 function (AB30R Only)
80-pin Cable Backward Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports
USB 2.0 interface: On board Philip ISL1561 (optional)
Complies with Universal Serial Bus Specification Rev. 2.0
Complies with Open Host Controller Interface Specification Rev. 1.0a
Complies with Enhanced Host Controller Interface Specification for USB
High performance USB 2.0 host with integrated USB 2.0 transceiver,
which supports high-speed, full-speed and low-speed signaling
Integrated two USB 1.1 ?OHCI and one USB 2.0 ?EHCI compliant host
controllers: works with all USB 1.1 and USB 2.0 devices
4 downstream ports with GoodLink TM feature
Supports peripheral hot Plug and Play as well as remote wakeup
Supports individual over-current protection for downstream ports
LPC I/O: ITE 8712F
Comply with Intel Low Pin Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial Ports
Supports IrDA 1.0/ASKIR protocols
Supports Smart Card Reader protocols
Built in Smart Card Reader
IEEE 1284 Parallel Port
Standard mode -- Bi-directional SPP compliant
Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant
High speed mode -- ECP, IEEE 1284 compliant
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives
Enhanced digital data separator
3-Mode drives supported
Keyboard Controller
Game Port
Dedicated MIDI Interface
Support power-failure resume and power button de-bounce
H/W Monitoring: Built in ITE 8712F
2 thermal inputs from remote thermal resistor to monitor system
temperature
1 thermal inputs from thermal diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer inputs
Smart Guardian Controller to provide programmable fan speed automatic
control
Power Management
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system suspend types- suspend to DRAM, suspend to
disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 4 Mb LPC flash memory
DMI 2.3
CPU 100 / 133MHz FSB setting
BIOS FSB step-less setting from 100MHz to 166MHz with 1 MHz increment
CPU core voltage setting from +0.025V ~ +0.20V
AGP (Vddq) voltage setting from +0.05V ~ +0.20V
I/O voltage setting from +0.1V ~0.2V
Support IRQ manual assign table
Bootable from Floppy, ATAPI device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back panel)
Ports:
Back Panel:
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB Ports
1x Game / MIDI Port
1x Line in, 1x Line out, 1x Mic
Connectors:
1 x ATX power connector
1 x 4 pin 12V ATX power connector
1 x 6 pin 5V / 3.3V ATX power connector
4 x Fan Power connectors (one for system chipset fan)
4 x UltraDMA/100 Bus Master IDE (2 RAID IDE for AB30R Only)
1 x Floppy
Jumpers:
Clear CMOS
BIOS Boot block protection
Headers:
2 sets of 2 x5 pin Front Panel USB header (1 set from ISL1561 by
optional)
1 x Central / Base audio header (optional)
Mini CD Audio in
TAD in
CD Audio in
Other Features
Suspend switch and LED
Accessory
CD-ROM Disk:
Intel IDE Driver
Intel INF installation utility
Audio CODEC driver
CMEDIA Audio driver
CMEDIA Audio Utility
ITE Smart Guardian Utility
Promise IDE driver (for AB30R Only)
User manuals in PDF format
IDE Cable:
1 x ATA 100/66 cable
1 x ATA 33 cable (for AB30R Only)
Floppy Cable:
1 x Floppy cable
USB cable
1 x USB 2.0 cable with bracket for header (optional)
User manual: 1 printed user manual
Chipset heat sink, CPU RM.
|
