規格:

CPU Support: Socket 478

Intel Pentium 4 in the 478 pin package

Chipsets

(North) Brookdale MCH HubA

Support Pentium 4 System bus

Support DDR 200 / 266 SDRAM interface

Support AGP interface

Support Hub interface to ICH2

Support ACPI 1.0b compliant power management

Support APM 1.2 compliant power management

(South) ICH2

Built in AC97 Controller

Support UDMA 33/66/100 IDE interface

Support USB interface

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

Supports PCI interface

Front Side Bus

100 Mhz support only

400 Mhz (NetBurst)

Form Factor

ATX

Memory: 2 x 184 pin DDR SDRAM Socket

Support DDR 200/266 compliant un-buffer / ECC SDRAM up to 2GB capacity

Audio: AC'97 audio

AC'97 2.1 compliant CODEC on board

H/W Audio: C-Media 8738 -PCI-6CH/LX (Optional)

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

Expansion Slot: 1 x AGP 2.0 compliant slot

Support external AGP V2.0 compliant VGA device

Support 1.5V AGP electrical only

Support 1X, 2X, 4X AGP data transfer

5 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

IDE interface: On board Promise 265R (optional)

2 x UltraDMA/100 Bus Master IDE from ICH2

2 x UltraDMA/100 Bus Master IDE from promise 265R to support RAID 0, RAID1 function

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

USB 2.0 interface: On board Philip ISL1561 (optional)

Complies with Universal Serial Bus Specification Rev. 2.0

Complies with Open Host Controller Interface Specification Rev. 1.0a

Complies with Enhanced Host Controller Interface Specification for USB

High performance USB 2.0 host with integrated USB 2.0 transceiver, which supports high-speed, full-speed and low-speed signaling

Integrated two USB 1.1 - OHCI and one USB 2.0 - EHCI compliant host controllers: works with all USB 1.1 and USB 2.0 devices

4 downstream ports with GoodLink TM feature

Supports peripheral hot Plug and Play as well as remote wakeup

Supports individual over-current protection for downstream ports

LPC I/O: ITE 8712F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

Supports two standard Serial Ports

Supports IrDA 1.0/ASKIR protocols

Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

H/W Monitoring: Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Bios: Award PnP BIOS

Stored in 4 Mb LPC flash memory

SMBios 2.3

CPU 100 / 133MHz FSB setting

BIOS FSB step-less setting from 100MHz to 166MHz with 1 MHz increment

CPU core voltage setting from +0.025V ~ +0.20V

AGP (Vddq) voltage setting from +0.05V ~ +0.20V

I/O voltage setting from +0.1V ~0.2V

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports (From ISL1561 by option)

1x Game / MIDI Port

1x Line in, 1x Line out, 1x Mic

Connectors:

1 x ATX power connector

1 x 4 pin 12V ATX power connector

3 x Fan Power connectors

4 x UltraDMA/100 Bus Master IDE (2 IDE optional)

1 x Floppy

Jumpers:

Clear CMOS BIOS Boot block protection

Headers:

2 sets of 2 x5 pin Front Panel USB header (1 set is optional)

1 x Central / Base audio header (optional)

Mini CD Audio in

TAD in

CD Audio in

Other Features:

Suspend switch and LED

Accessory:

CD-ROM Disk:

Intel IDE Driver

Intel INF installation utility

Audio CODEC driver

CMEDIA Audio driver (optional)

CMEDIA Audio Utility (optional)

ITE Smart Guardian Utility

Promise IDE driver (optional)

User manuals in PDF format

IDE Cable:

1 x ATA 100/66 cable

1 x ATA 33 cable (optional)

Floppy Cable:

1 x Floppy Cable

User manual:

1 printed user manual

Chipset heat sink, RM, and fan