規格:

CPU Support: Socket 478

Intel Pentium 4 / Celeron in the 478 pin package with 400/533MHz FSB

Chipsets:

(North) Intel 845E MCH Hub

Support Pentium 4 System bus

Support DDR200/266 DDR SDRAM interface

Support AGP interface

Support Hub interface to ICH4

Support ACPI 1.0b compliant power management

Support APM 1.2 compliant power management

(South) ICH4

Built in 6ch AC'97 audio

Support UDMA 33/66/100 IDE interface

Support USB 2.0 interface

Support dual ultra ATA100 controller

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

Supports PCI interface

Form Factor:

ATX

Memory:

2 x 184 pin DDR SDRAM Socket

Support PC1600/2100 compliant DDR SDRAM up to 2GB capacity

Audio:6 channel audio

Realtek ALC650 on board

18-bit ADC and DAC resolution

Compliant with AC'97 2.2 specifications

6 channel slot selectable DAC output for multi-channel applications

3D Stereo enhancement

Digital S/PDIF output.

Digital S/PDIF input.

Expansion Slot:

1 x AGP 2.0 compliant slot

Support 1.5V AGP electrical device only

Support 4X AGP data transfer

Integrated AGP-proof circuit to prevent the electrical damage by 3.3V AGP card

5 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

LPC I/O:ITE 8712F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

IEEE 1284 Parallel Port

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Keyboard Controller

Support power-failure resume and power button de-bounce

H/W Monitor: Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

IDE interface:ICH4

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

BIOS: Award PnP BIOS

Stored in 2 Mb LPC flash memory

DMI 2.3

BIOS FSB step-less setting from 100MHz to 166MHz with 1 MHz increment

CPU Multiplier adjustment

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB2.0 Ports

1x Game / MIDI Port

1x Line in, 1x Line out, 1x Mic

Connectors:

1 x ATX power connector

3 x Fan Power connectors

2 x UltraDMA/100 Bus Master IDE

1 x Floppy

Jumpers:

Boot ROM protection

Clear CMOS

Headers:

2 sets of 2 x 5 pin USB2.0 header

CD Audio in

IrDA header

Central / Bass audio header

Wake on Lan header

Accessory:CD-ROM Disk:

Intel IDE Driver

Intel INF installation utility

Realtek audio driver

ITE Smart Guardian Utility

User manuals in PDF format

IDE Cable:

1 x ATA 100/66 cable

Floppy Cable:

1 x Floppy cable

User manual:

1 printed user manual

Chipset heat sink

CPU RM