Intel Celeron FC-PGA with 66 / 100 MHz FSB

Intel Pentium III FC-PGA with 100/133 MHz FSB

Intel Pentium III FC-PGA2 with 133 MHz FSB

VIA Cyrix III with 100/133 MHz FSB

Chipsets

(North) Intel 82815EP (B-stepping) Memory Controller Hub

Host interface

AGP interface

SDRAM interface

(South) Intel I/O Controller Hub 2 (ICH2)

AC97 Controller

UDMA 33/66/100 IDE interface

USB interface

Integrated LAN MAC

Power management meet ACPI requirement

RTC

Board Size

ATX Form Factor

Memory

3 x 168-Pin DIMM Sockets Support 8MB to 512MB PC100,133 SDRAM

LPC I/O ITE 8712F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

Supports two standard Serial Ports

Supports IrDA 1.0/ASKIR protocols

Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

Hardware Monitor Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temerature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

PCI/AGP/CNR Slots

6PCI + 1AGP + 1CNR for Maximum Expansion

PCI 2.2, 32-bit BUS Master Slots

AGP V2.0 compliant (Support external AGP 2x,4x device)

1 x CNR (Communication Networking Riser)

BIOS

4Mb BIOS with Full ACPI, APM, DMI, Green, PnP

Support boot from FDD / IDE / ATAPI / SCSI / USB device

CPU Multiplier Ratio Selections

Support FSB adjustment per 1MHz from 66 – 166MHz

Support CPU Vcore adjustment per 0.01V

Support AGP (Vddq) adjustment per 0.1V

Support Vio adjustment per 0.1V

Support IRQ manual assign table

PC'99 Color-Coded I/O Ports

2 x USB Ports (Support Hot-Plug Function)

2 x Com Ports, 1x Parallel Port (EPP, ECP)

1x PS/2 Keyboard Port, 1x PS/2 Mouse Port

1x game / MIDI Port

1x Line in, 1x Line out, 1x Mic

UltraDMA/100 IDE controller On board Promise 265R

2 x UltraDMA/100 Bus Master IDE from ICH2

2 x UltraDMA/100 Bus Master IDE from promise 265R to support RAID 0, RAID1 function

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

H/W Audio controller

C-Media 8738 - PCI-6CH/LX

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

Varies clocking Setting

FSB: 66/75/83/100/112/124/133/150/160/166MHz (BIOS Setting)

Multiplier: x3/x3.5/x4/x4.5/x5/x5.5/x6/x6.5/x7/x7.5/x8 (BIOS Setting)

ATX 20 pin Power Connector

ATX 20-pin Power Connectors for 3.3V, 5V, 5VSB and 12V

Power Management

Support multiple system suspend types - suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Connectors & Headers

1 x Floppy Port (Up to 2.88 MB, 3 Mode)

3 x FAN Power Connector

1 x Wake On LAN

1 x Wake On Ring

IrDA Tx/Rx Header

2 x Front Panel USB Connector Header

AUX in (White Color)

TAD in (Green Color)

CD Audio in (Black Color)

1 x Intruder Header

Jumpers

Clear CMOS

BIOS Boot block protection

Accessory

1 CD-ROM disk contains: Intel IDE Driver, Intel INF installation utility, CMEDIA Audio Driver, ITE Smart Guardian Utility, Promise IDE driver, User manuals

1 user manual

1 ATA66/100 IDE cable

1 FDD cable

1 Heat Sink attached on North Bridge

1 AGP RM