Intel Celeron FC-PGA with 66 / 100 MHz FSB

Intel Pentium III FC-PGA with 100/133 MHz FSB

Intel Pentium III FC-PGA2 with 133 MHz FSB

VIA Cyrix III with 100/133 MHz FSB

Chipsets

(North) Intel 82815EP (B-stepping) Memory Controller Hub

Host interface

AGP interface

SDRAM interface

(South) Intel I/O Controller Hub 2 (ICH2)

AC97 Controller

UDMA 33/66/100 IDE interface

USB interface

Integrated LAN MAC

Power management meet ACPI requirement

RTC

Board Size

ATX Form Factor

Memory

3 x 168-Pin DIMM Sockets Support 8MB to 512MB PC100,133 SDRAM

LPC I/O ITE 8712F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

Supports two standard Serial Ports

Supports IrDA 1.0/ASKIR protocols

Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

Hardware Monitor Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temerature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

PCI/AGP/CNR Slots

6PCI + 1AGP + 1CNR for Maximum Expansion

PCI 2.2, 32-bit BUS Master Slots

AGP V2.0 compliant (Support external AGP 2x,4x device)

1 x CNR (Communication Networking Riser)

BIOS

4Mb BIOS with Full ACPI, APM, DMI, Green, PnP

Support boot from FDD / IDE / ATAPI / SCSI / USB device

CPU Multiplier Ratio Selections

Support FSB adjustment per 1MHz from 66 ?166MHz

Support CPU Vcore adjustment per 0.01V

Support AGP (Vddq) adjustment per 0.1V

Support Vio adjustment per 0.1V

Support IRQ manual assign table

PC'99 Color-Coded I/O Ports

2 x USB Ports (Support Hot-Plug Function)

2 x Com Ports, 1x Parallel Port (EPP, ECP)

1x PS/2 Keyboard Port, 1x PS/2 Mouse Port

1x game / MIDI Port

1x Line in, 1x Line out, 1x Mic

UltraDMA/100 IDE controller On board Promise 265R

2 x UltraDMA/100 Bus Master IDE from ICH2

2 x UltraDMA/100 Bus Master IDE from promise 265R to support RAID 0, RAID1 function

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

H/W Audio controller

C-Media 8738 - PCI-6CH/LX

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

Varies clocking Setting

FSB: 66/75/83/100/112/124/133/150/160/166MHz (BIOS Setting)

Multiplier: x3/x3.5/x4/x4.5/x5/x5.5/x6/x6.5/x7/x7.5/x8 (BIOS Setting)

ATX 20 pin Power Connector

ATX 20-pin Power Connectors for 3.3V, 5V, 5VSB and 12V

Power Management

Support multiple system suspend types - suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Connectors & Headers

1 x Floppy Port (Up to 2.88 MB, 3 Mode)

3 x FAN Power Connector

1 x Wake On LAN

1 x Wake On Ring

IrDA Tx/Rx Header

2 x Front Panel USB Connector Header

AUX in (White Color)

TAD in (Green Color)

CD Audio in (Black Color)

1 x Intruder Header

Jumpers

Clear CMOS

BIOS Boot block protection

Accessory

1 CD-ROM disk contains: Intel IDE Driver, Intel INF installation utility, CMEDIA Audio Driver, ITE Smart Guardian Utility, Promise IDE driver, User manuals

1 user manual

1 ATA66/100 IDE cable

1 FDD cable

1 Heat Sink attached on North Bridge

1 AGP RM