規格:

CPU Support: Socket A CPU

AMD Duron CPU with 200MHz FSB

AMD Athlon CPU with 200 / 266MHz FSB

Chipsets: VIA KT266A

(North) VIA VT8366A

High Performance Athlon CPU Interface

Integrated full featured Accelerated Graphics Port (AGP) controller

Integrated high bandwidth 266MB/S 8-bit Vlink Host controller

Integrated advanced high performance DDR DRAM controller

(South) VIA VT8233

Built in high bandwidth 266MB/S 8-bit Vlink Host controller

Integrated Fast Ethernet Controller with 1/10/100Mb capability

Integrated USB controller with three root hub and six function ports

Integrated dual channel UDMA 33/66/100 master mode EIDE controller

LPC interface for Low Pin Count interface to Super-I/O or ROM

Integrated Keyboard Controller with PS2 mouse support

Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM and Day/Month Alarm for ACPI

System Management Bus Interface

Sophisticated PC99-Compatible Mobile Power Management

Integrated Plug and Play Controller

Front Side Bus

Including 100/133 MHz (BIOS step-less adjustable)

Form Factor

ATX

Multiplier

Jumper-less (BIOS adjustable)

Memory: 4 x 184-pin DIMM

Supports 6 banks up to 3 GB DRAMs (512Mb x8/x16 DRAM technology) for un-buffered DDR SDRAM module

Supports 8 banks up to 4 GB DRAMs (512Mb x8/x16 DRAM technology) for register DDR SDRAM module

No ECC function support

H/W Audio: C-Media 8738

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

USB Hub: Built in VT8233

Integrated USB Controller with three root hubs and six function ports

USB v.1.1 and Intel Universal HCI v.1.1 compatible

Support up to 6 ports

Expansion Slot:

AGP: 1 AGP slot

Support AGP 2.0 compliant, 1X, 2X, 4X AGP device

Supports SideBand Addressing (SBA) mode (non-multiplexed address / data)

PCI: 6 PCI slots, PCI 2.2 compliant

Support 32 bit PCI master mode device

133 Mbyte/sec Maximum Throughput

I/O: Winboad 83697HF

Meet LPC Spec. 1.01

Integrate Hardware Monitor functions

Support up to four 3.5-inch or 5.25-inch floppy disk drives

Two high-speed 16550 compatible UARTs

Support IrDA version 1.0 SIR, SHARP ASK-IR Consumer IR with Wake-Up function

Support PS/2 compatible bi-directional parallel port

Support Enhanced Parallel Port (EPP) - Compatible with IEEE 1284 specification

Support Extended Capabilities Port (ECP) - Compatible with IEEE 1284 specification

Game Port

MIDI Port

IDE interface: Built in VT8233

2 x UltraDMA/100 Bus Master IDE from VT8233

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

2 x UltraDMA/133 Bus Master IDE from High Point 372 to support RAID 0, RAID1, RAID0+1 function (AK35GTR only)

H/W Monitoring: Built in Winbond 83697HF

Smart fan control system, support "Thermal Cruise" and "Speed Cruise

2 thermal inputs from CPU and system temperature sensor

6 positive voltage inputs (+12V, -12V, +5V, -5V, +3.3V, Vcore)

2 intrinsic voltage monitoring (Vbat, +5VSB)

2 fan speed monitoring inputs

2 fan speed control

Build in Case open detection circuit

WATCHDOG comparison of all monitored values

Programmable hysteresis and setting points for all monitored items

Over temperature indicate output

Automatic Power On voltage detection Beep

Issue SMI#, IRQ, OVT# to activate system protection

Winbond Hardware Doctor

Support Intel LDCM TM / Acer ADM compatible

Power Management

ACPI v1.0 Compliant

APM v1.2 Compliant

Supports multiple system suspend types: power-on suspends with flexible CPU/PCI bus reset options, suspend to DRAM, and suspend to disk (soft-off), all with hardware automatic wake-up

Multiple suspend power plane controls and suspend status indicators

lThermal alarm on either external temperature sensing circuits

Support Power Fail Resume function

Bios: Built in 2Mb Flash ROM

Award PnP BIOS

DMI 2.3

BIOS FSB step-less setting from 100MHz to 166MHz

BIOS Multiplier setting from 5X to 14X

CPU core voltage setting from +0.025V ~ +0.20V

Support IRQ manual assign table

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

2 x IDE

1 x Floppy

Connectors:

1 x PS/2 Keyboard

1 x PS/2 Mouse

2 x USB

2 x COM

1 x Parallel

Jumpers:

Clear CMOS

BIOS boot block protection

Headers:

4 x USB

4 x FAN

Wake On Lan

S3 power status with LED

Front Panel for Power_LED, Power_On, Speaker, Reset, IDE_LED

Intrusion detect

System temperature detect with fixed sensor

Other Features:

Suspend switch and LED

Accessory: (CD-ROM Disk)

VIA 4-1 driver

C-Media Audio driver

User manual in PDF file

IDE Cable:

1 x UDMA 66/100 cable

Floppy Cable:

1 x Floppy Cable

Audio Cable: (optional)

1 x Audio Cable for Central and Bass out

User manual:

1 x print user manual

1 x Heat Sink and fan attached on North Bridge chipset

1 x AGP RM