AS40GT2/AS40GT2R 主機板

規格:

Chipset

(North) SiS 645DX

Supports Intel R Pentium R 4 processor system bus at 100/133MHz (400/533 MHz Data Bus)

3 Unbuffered DIMM of 2.5 volt DDR200/266/333 compliant SDRAM up to 3 GB memory capacity

AGP interface to support external AGP2.0 compliant device

High Throughput SiS MuTIOL connect to SiS961 MuTIOL Media I/O to perform 533MB/s bandwidth

(South) SiS961B

Built in AC97 Controller

Support UDMA 33/66/100/133 IDE interface

Integrated 2 USB 1.1 compliant host controller to support up to 6 USB ports

Built in Integrated LAN MAC

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

PCI interface supports PCI 2.2 compliant device

 

Front Side Bus

100 / 133MHz (Bios adjustable)

Form Factor

ATX

Processor: Socket 478

Intel Pentium 4 in the 478 pin package

Expansion Slot

1 x AGP 2.0 compliant slot

Support external AGP V2.0 compliant VGA device

Support 1X, 2X, 4X AGP data transfer

5 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

Memory: 3 x 184-pin DDR SDAM

Supports 6 banks up to 3 GB DDR 200 / 266 / 333 compliant SDRAM

Supports 16Mb, 64Mb, 128Mb, 256Mb, & 512Mb SDRAM technology with page size from 2KB up to 16 KB

Sustains DDR SDRAM CAS Latency at options of 2, 2.5, & 3 clocks

H/W Audio:C-Media 8738 -PCI-6CH/LX

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

IDE interface:On board High Point 372 (AS40GTR only)

2 x UltraDMA/100 Bus Master IDE from SiS961

2 x UltraDMA/133 Bus Master IDE from High Point 372 to support RAID 0, RAID1, RAID0+1 function

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

LPC I/O: ITE 8705F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

Supports two standard Serial Ports

Supports IrDA 1.0/ASKIR protocols

Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

 

H/W Monitoring:Built in ITE 8705F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

 

Bios:Award PnP BIOS

Stored in 2 Mb flash memory

DMI 2.3

CPU 100 / 133MHz FSB setting

BIOS FSB step-less setting from 100MHz to 112MHz

CPU core voltage setting from +0.025V ~ +0.20V

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports

1x Game / MIDI Port

1x Line in, 1x Line out, 1x Mic

Connectors:

1 x ATX power connector

1 x 4 pin 12V ATX power connector

1 x 6 pin ATX P4 power connector

4 x Fan Power connectors

4 x UltraDMA/100 Bus Master IDE (2 IDE AS40GTR optional)

Jumpers:

Clear CMOS

BIOS Boot block protection

Headers:

2 sets of 2 x5 pin Front Panel USB header

1 x Central / Base audio header

Mini CD Audio in

TAD in

CD Audio in

 

Other Features

Suspend switch and LED

Accessory:CD-ROM Disk:

SIS IDE Driver

SIS AGP driver

CMEDIA Audio driver

CMEDIA Audio Utility

ITE Smart Guardian Utility

High Point IDE driver (AS40GTR only)

User manuals in PDF format

Audio Cable

1 x audio cable for center / woofer output

USB Cable

1 x USB cable with bracket

IDE Cable:

1 x ATA 100/66 cable

1 x ATA 100/66 cable (AS40GTR only)

Floppy Cable:

1 x Floppy cable

User manual:

1 printed user manual

Chipset heat sink with fan, CPU RM, AGP RM

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我