| AS45GT/R
AS45GT/R
Form Factor: ATX
CPU Support: Socket 478
Intel Pentium 4 / Celeron in
the 478 pin package with 400/533MHz
FSB
Chipsets:
(North) SiS 648
Supports Intel ® Pentium ® 4
processor system bus at 100/133 MHz
(400/533 MHz Data Bus)
3 Un-buffered DIMM of 2.5 volt
DDR200/266/333 compliant SDRAM
up to 3 GB memory capacity
AGP interface to support
external AGP2.0 / 3.0 compliant device
High Throughput SiS MuTIOL
connect to SiS963 MuTIOL Media I/O
to perform 1GB/s bandwidth
(South) SiS963
Support UDMA 33/66/100/133 IDE
interface
Integrated 2 USB 1.1/2.0
compliant host controller to support up to 6
USB ports
Built in Integrated LAN MAC
Built in 1394 controller
Support ACPI 1.0b compliant
power management
Built in RTC (Real Time Clock)
PCI interface supports PCI 2.2
compliant device
Memory: 3 x 184-pin DDR SDAM
Supports 6 banks up to 3 GB
PC1600/2100/2700 compliant DDR
SDRAM
Audio: 6 channel audio
Realtek ALC650 on board
18-bit ADC and DAC resolution
Compliant with AC’97 2.2
specifications
6 channel slot selectable DAC
output for multi-channel applications
3D Stereo enhancement
Digital S/PDIF output.
Digital S/PDIF input.
Expansion Slot: 1 x AGP 2.0 /
3.0 compliant slot
Support external AGP V2.0 /
3.0 compliant VGA device
Support 2X, 4X, 8X AGP data
transfer
Support external 1.5V AGP
electrical device
Integrated AGP-proof circuit
to prevent the electrical damage by 3.3V
AGP card
5 x PCI slots
PCI 2.2 compliant, 32-bit BUS
Master Slots
133 Mbyte / sec maximum
throughput
IDE interface: On board High
Point 372 (AS45GTR only)
2 x UltraDMA100 / 133 Bus
Master IDE from SiS963
2 x UltraDMA100 / 133 Bus
Master IDE from High Point 372 to
support RAID 0, RAID1, RAID0+1 function
80-pin Cable Backward
Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW,
and LS-120 Supports
Serial ATA interface: On board
Marvell 88i8030 (AS45GTR only)
Support serial ATA interface
of 1.5Gb/s bandwidth
2 x Serial ATA connectors from
Marvell 88i8030 to support RAID 0,
RAID1 function
USB 2.0 interface: Built in SiS 963
Complies with Universal Serial
Bus Specification Rev. 2.0
Complies with Enhanced Host
Controller Interface Specification for
USB
High performance USB 2.0 host
with integrated USB 2.0 transceiver,
which supports high-speed, full-speed and low-speed signaling
1394 interface: Built in SiS 963
Compliant with IEEE 1394-1995
and 1394a-2000
Provide Bus Master function
Interface (OHCI) Specification1.1.
Supports the Plug-and-Play
(PNP) Specification.
Compliant to Latest PCI
Specification, PCI 2.2.
Supports Serial Bus Data Rates
of 100, 200,and 400 Mbits/s.
LPC I/O: ITE 8705F
Comply with Intel Low Pin
Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial
Ports
Supports IrDA 1.0/ASKIR
protocols
Supports Smart Card Reader
protocols
Built in Smart Card Reader
IEEE 1284 Parallel Port
Standard mode --
Bi-directional SPP compliant
Enhanced mode -- EPP V. 1.7
and V. 1.9 compliant
High speed mode -- ECP, IEEE
1284 compliant
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/
1.44M/ 2.88M floppy disk drives
Enhanced digital data
separator
3-Mode drives supported
Support power-failure resume
and power button de-bounce
H/W Monitoring: Built in ITE
8705F
2 thermal inputs from remote
thermal resistor to monitor system
temperature
1 thermal inputs from thermal
diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer
inputs
Smart Guardian Controller to
provide programmable fan speed
automatic control
Power Management:
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system
suspend types- suspend to DRAM,
suspend to disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb flash memory
DMI 2.3
CPU 100 / 133MHz FSB setting
BIOS FSB step-less setting
from 100MHz to 200MHz with 1 MHz
increment
CPU core voltage setting from
+0.025V ~ +0.20V
AGP (Vddq) voltage setting
from +0.05V ~ +0.20V
I/O voltage setting from +0.1V
~0.2V
Support IRQ manual assign
table
Bootable from Floppy, ATAPI
device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back
panel):
Ports:
Back Panel:
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB Ports
1 Game / MIDI Port
1 Line in, Line out, Mic
Connectors:
1 x ATX power connector
1 x 4 pin ATX12V power
connector
4 x Fan Power connectors
2 x UltraDMA/133 Bus Master
IDE (4 IDE for AS45GTR only)
2 x Serial ATA (AS45GTR only)
1 x Floppy
Jumpers:
Clear CMOS
BIOS Boot block protection
Headers:
2 sets of 2 x5 pin Front Panel
USB header
1 x Central / Base audio
header
SPDIF IN / Out
Mini CD Audio in
TAD in
CD Audio in
3 X 1394 ports
Other Features:
Suspend switch and LED
|
|
