Intel Pentium 4 Processor

Chipsets: Intel 850

(North) Intel 850

Supports Intel Pentium 4 processor system bus at 100 MHz (400 MHz Data Bus)

Directly supports two RDRAM Direct channels

Supports 300 MHz and 400 MHz RDRAM

Supports maximum memory bandwidth of 3.2 GB/s

Supports 128Mb and 256Mb RDRAM densities

Dual Channel maximum memory array size is 1 GB using 128Mb RDRAM technology and 2 GB using 256Mb RDRAM technology

Integrated Accelerated Graphics Port (AGP) Interface

Supports AGP 2.0 including 4x AGP data transfers and 2x/4x Fast Write protocol

Supports only 1.5v AGP signaling levels

ACPI Rev 1.0 compliant power management

APM Rev 1.2 compliant power management

(South bridge) Intel ICH2

Integrated AC97 Controller

UDMA 100/66/33 IDE interface

USB interface

Power management meet ACPI requirement

RTC

Form Factor

ATX

Front Side Bus

100 MHz

Memory

4 x 184-pin RIMM

Supports 4 banks up to 2 GB RDRAM

RIMM Type

64/128/256/512 MB

On Board Sound

Realtek ALC201A

Digital AC97 Audio

USB Hub: Built in Intel ICH2

Integrated USB Controller with three root hubs and four function ports

USB v.1.1 and Intel Universal HCI v.1.1 compatible

Support up to 4 ports

Expansion Slot

1 4xAGP slot

Support AGP 2.0 compliant, 1X, 2X, 4X AGP device

Supports SideBand Addressing (SBA) mode (non-multiplexed address / data)

PCI:

5 PCI slots, PCI 2.2 compliant

Support 32 bit PCI master mode device

133 Mbyte/sec Maximum Throughput

CNR:

1 CNR slots

Support CNR riser card for Modem function

I/O: Winbond W83627HF

Meet LPC Spec. 1.01

Integrate Hardware Monitor functions

Support up to two 3.5-inch or 5.25-inch floppy disk drives

Two high-speed 16550 compatible UARTs

Support IrDA version 1.0 SIR, SHARP ASK-IR Consumer IR with Wake-Up function

Support PS/2 compatible bi-directional parallel port

Support Enhanced Parallel Port (EPP) - Compatible with IEEE 1284 specification

Support Extended Capabilities Port (ECP) - Compatible with IEEE 1284 specification

Game Port

MIDI Port

IDE: Built in Intel ICH2

Dual channel master mode PCI supporting four Enhanced IDE devices

Transfer rate up to 33MB/sec to cover PIO mode 4, multi-word DMA mode 2 drives, and UltraDMA-33 interface and increased reliability using UltraDMA-66/100 transfer protocols

On board 2 IDE port

H/W Monitoring: Built in Winbond W83627HF

Smart fan control system, support "Thermal Cruise" and "Speed Cruise"

2 thermal inputs from CPU and system temperature sensor

6 positive voltage inputs (+12V, -12V, +5V, -5V, +3.3V, Vcore)

2 intrinsic voltage monitoring (Vbat, +5VSB)

3 fan speed monitoring inputs

Over temperature indicate output

Power Management: Built in Winbond W83627HF

ACPI v1.0 Compliant

APM v1.2 Compliant

Supports multiple system suspend types: power-on suspends with flexible CPU/PCI bus reset options, suspend to DRAM, and suspend to disk (soft-off), all with hardware automatic wake-up

Multiple suspend power plane controls and suspend status indicators

Support Power Fail Resume function

Bios: Built in 4Mb/2Mb Firmware Hub

Award PnP BIOS

DMI 2.3

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

2 x IDE

1 x Floppy

Back Panel Connectors:

1 x PS/2 Keyboard

1 x PS/2 Mouse

2 x USB

2 x COM

1 x Parallel

1 x Game / Midi Port

1 x Line in / Line out / Mic

Headers:

2 x USB

3 x FAN

S3 power status with LED

Front Panel for Power_LED, Power_On, Speaker, Reset, IDE_LED

System temperature detect with fixed sensor

Accessory

CD-ROM Disk

1 x UDMA 66/100 cable

1 x Floppy Cable

1 x printed user manual

1 x CPU Cooling Fan Retention Module

2 x C-RIMM module