规格:

CPU Support: Socket 478

Intel Pentium 4 in the 478 pin package

Chipsets

(North) Intel 850

Supports Intel ?Pentium ?4 processor system bus at 100 MHz (400 MHz Data Bus)

Directly supports two RDRAM Direct channels

Supports 300 MHz and 400 MHz RDRAM

Supports maximum memory bandwidth of 3.2 GB/s

Supports 128Mb and 256Mb RDRAM densities

Dual Channel maximum memory array size is 1 GB using 128Mb RDRAM technology and 2 GB using 256Mb RDRAM technology.

Integrated Accelerated Graphics Port (AGP) Interface

Supports AGP 2.0 including 4x AGP data transfers and 2x/4x Fast Write protocol

Supports only 1.5v AGP signaling levels

ACPI Rev 1.0 compliant power management

APM Rev 1.2 compliant power management

(South) ICH2

Built in AC97 Controller

Support UDMA 33/66/100 IDE interface

Support USB interface

Built in Integrated LAN MAC

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

Supports PCI interface

Form Factor

ATX

Front Side Bus

100 / 133MHz

Memory: 4 x 184-pin RIMM

Supports 4 banks up to 2 GB RDRAM

RIMM Type: 64/128/256/512 MB

Audio: AC97 audio

AC'97 2.1 compliant CODEC on board

H/W Audio: C-Media 8738 -PCI-6CH/LX

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

Expansion Slot: 1 x AGP 2.0 compliant slot

Support external AGP V2.0 compliant VGA device

Support 1.5V AGP electrical only

Support 1X, 2X, 4X AGP data transfer

5 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

IDE interface: On board Promise 265R (optional)

2 x UltraDMA/100 Bus Master IDE from ICH2

2 x UltraDMA/100 Bus Master IDE from promise 265R to support RAID 0, RAID1 function

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

USB 2.0 interface: On board Philip ISL1561 (optional)

Complies with Universal Serial Bus Specification Rev. 2.0

Complies with Open Host Controller Interface Specification Rev. 1.0a

Complies with Enhanced Host Controller Interface Specification for USB

High performance USB 2.0 host with integrated USB 2.0 transceiver, which supports high-speed, full-speed and low-speed signaling

Integrated two USB 1.1 - OHCI and one USB 2.0 - EHCI compliant host controllers: works with all USB 1.1 and USB 2.0 devices

4 downstream ports with GoodLink TM feature

Supports peripheral hot Plug and Play as well as remote wakeup

Supports individual over-current protection for downstream ports

LPC I/O: ITE 8712F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

- Supports two standard Serial Ports

- Supports IrDA 1.0/ASKIR protocols

- Supports Smart Card Reader protocols

Floppy Disk Controller

- Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

- Enhanced digital data separator

- 3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

H/W Monitoring: Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

- Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Bios: Award PnP BIOS

Stored in 4 Mb LPC flash memory

DMI 2.3

FSB setting from 100/105/110/120/125/130/133/140/150/154MHz

CPU Ratio setting from x8, x10 ~ x24

CPU core voltage setting from +0.025V ~ +0.20V

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports (From ISL1561 by option)

1 x Game / MIDI Port

1 x Line in, 1x Line out, 1 x Mic

Connectors:

1 x ATX power connector

1 x 4 pin 12V ATX power connector

3 x Fan Power connectors

4 x UltraDMA/100 Bus Master IDE (2 IDE optional)

1 x Floppy

Jumpers:

Clear CMOS

RAID Enable/Disable

Headers:

1 sets of 2 x 5 pin Front Panel USB 1.1 header

2 sets of 2 x5 pin Front Panel USB 2.0 header (optional)

1 x Central / Base audio header

Mini CD Audio in

AUX in

CD Audio in

Other Features:

Suspend switch and LED

Accessory:

CD-ROM Disk:

Intel IDE Driver

Intel INF installation utility

CMEDIA Audio driver

CMEDIA Audio Utility

ITE Smart Guardian Utility

Promise IDE driver (optional)

User manuals in PDF format

IDE Cable:

1 x ATA 100/66 cable

1 x ATA 33 cable (optional)

Floppy Cable:

1 x Floppy cable

User manual:

1 printed user manual

Chipset heat sink, RM, and fan