中央处理器：
支持 Intel FC-PGA2封装 Socket 478 奔腾4处理器
芯片组：
采用 VIA P4X266 芯片组(P4X266+VT8233)
内存：
3根2.5V 184-pin DIMM 插槽
支持16/32/64/128/256/512MB DDR SDRAM 内存模组
可支持到1.5 GB DDR SDRAM
输入输出：
芯片VT8233内建输入输出功能
板上集成2个可支持四个PIO 3/4和Ultra DMA33/66/100的硬盘接口
板上集成2个可支持RIAD 0，1功能的硬盘接口
1个软驱接口
1个PS/2鼠标接口
1个PS/2键盘接口
2个USB接口,4个USB可扩展接口
BIOS：
2MB BIOS,支持Award Plug&Play BIOS和可擦写Flash EPROM
扩充槽：
1 X AGP 通用AGP插槽支持AGP4X
5 X PCI 32bit BusMaster模式
结构尺寸：
ATX布线规格,4 层PCB版,尺寸305mm x 244mm
特殊功能：
3 Phase PWM电流回路，可持续提供稳定电压，保持系统稳定。
通过BIOS调节处理器Vcore电压调节（1.100V - 1.850V,以0.025V递增）
通过BIOS调节处理器倍频(CPU倍频从10x - 24x以每1x递增)
通过BIOS调节内存I/O电压(2.55V - 2.70V)
通过BIOS调节FSB（外频）,频率从100-166MHz以1M递增
芯片(VT8233)内建侦测计算机内风扇状态/电压/温度数值和硬件运行状况的功能
支持键盘开机功能
支持WOL网络开机
支持STR休眠功能
完全符合PC99规范
附赠全方位防毒及Ghost软件CPU Support: Socket 478
Intel Pentium 4 in the 478 pin package
Chipsets: VIA P4X266
(North) VIA P4X266:
Support Pentium 4 System bus
Support DDR 200 / 266 SDRAM interface
Support AGP interface
Support V-Link interface to VT8233
Support ACPI 1.0b compliant power management
Support APM 1.2 compliant power management
(South) VIA VT8233
Built in high bandwidth 266MB/S 8-bit V-link Host controller
Integrated USB controller with three root hub and six function ports
Integrated dual channel UDMA 33/66/100 master mode EIDE controller
LPC interface for Low Pin Count interface to Super-I/O or ROM
Integrated Keyboard Controller with PS2 mouse support
Integrated DS12885-style Real Time Clock with extended 256 byte CMOS
RAM and Day/Month Alarm for ACPI
System Management Bus Interface
Sophisticated PC99-Compatible Mobile Power Management
Integrated Plug and Play Controller
Form Factor
ATX
Front Side Bus
100 / 133MHz (Bios adjustable)
Memory
Support DDR 200/266 compliant SDRAM up to 1.5GB (un-buffered) capacity
Support DDR 200/266 compliant SDRAM up to 3GB (registered) capacity
Audio: AC97 audio
AC'97 2.1 compliant CODEC on board
Expansion Slot:1 x AGP 2.0 compliant slot
Support external AGP V2.0 compliant VGA device
Support 1.5V AGP electrical only
Support 1X, 2X, 4X AGP data transfer
5 x PCI slots
PCI 2.2 compliant, 32-bit BUS Master Slots
133 Mbyte / sec maximum throughput
IDE interface:On board Promise 265R (AV40R only)
2 x UltraDMA/100 Bus Master IDE from ICH2
2 x UltraDMA/100 Bus Master IDE from promise 265R to support RAID 0,
RAID1 function
80-pin Cable Backward Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports
USB 2.0 interface:On board Philip ISL1561 (optional)
Complies with Universal Serial Bus Specification Rev. 2.0
Complies with Open Host Controller Interface Specification Rev. 1.0a
Complies with Enhanced Host Controller Interface Specification for USB
High performance USB 2.0 host with integrated USB 2.0 transceiver,
which supports high-speed, full-speed and low-speed signaling
Integrated two USB 1.1 - OHCI and one USB 2.0 - EHCI compliant host
controllers: works with all USB 1.1 and USB 2.0 devices
4 downstream ports with GoodLink TM feature
Supports peripheral hot Plug and Play as well as remote wakeup
Supports individual over-current protection for downstream ports
LPC I/O:ITE 8705F
Comply with Intel Low Pin Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial Ports
Supports IrDA 1.0/ASKIR protocols
Supports Smart Card Reader protocols
Built in Smart Card Reader
IEEE 1284 Parallel Port
Standard mode -- Bi-directional SPP compliant
Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant
High speed mode -- ECP, IEEE 1284 compliant
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives
Enhanced digital data separator
3-Mode drives supported
Keyboard Controller
Game Port
Dedicated MIDI Interface
Support power-failure resume and power button de-bounce
H/W Monitoring:Built in ITE 8705F
2 thermal inputs from remote thermal resistor to monitor system
temperature
1 thermal input from thermal diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer inputs
Smart Guardian Controller to provide programmable fan speed automatic
control
Power Management
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system suspend types - suspend to DRAM, suspend to
disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb flash memory
DMI 2.3
CPU 100 / 133MHz FSB setting
BIOS FSB step-less setting from 100MHz to 166MHz with 1 MHz increment
CPU core voltage setting from +0.025V ~ +0.20V
AGP (Vddq) voltage setting from +0.05V ~ +0.20V
I/O voltage setting from +0.1V ~0.2V
Support IRQ manual assign table
Bootable from Floppy, ATAPI device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back panel):
Ports
Back Panel:
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB Ports
1x Game / MIDI Port
1x Line in, 1x Line out, 1x Mic
Connectors:
1 x ATX power connector
1 x 4 pin 12V ATX power connector
1 x 6 pin 5V / 3.3V ATX power connector
4 x Fan Power connectors (one for system chipset fan)
4 x UltraDMA/100 Bus Master IDE (2 RAID IDE optional)
1 x Floppy
Jumpers:
Clear CMOS
BIOS Boot block protection
Headers:
2 sets of 2 x5 pin Front Panel USB header (1 set is from ISL1561 by
optional)
Mini CD Audio in
TAD in
CD Audio in
Other Features:
Suspend switch and LED
Accessory:
CD-ROM Disk contains:
VIA 4 in 1 Driver
CODEC driver
ITE Smart Guardian Utility
Promise IDE driver (AV40R only)
User manuals in PDF format
IDE Cable:
1 x ATA 100/66 cable
Floppy Cable:
1 x Floppy cable
USB cable:
1 x USB 2.0 cable with bracket for header (optional)
User manual:
1 printed user manual
Chipset heat sink, CPU RM.
|
