Specifications:

CPU Support: Socket 478

Intel Pentium 4 in the 478 pin package

Chipsets:

(North) VIA P4X266A

Support Pentium 4 System bus

Support PC100 / 133 SDRAM interface

Support AGP interface

Support V-Link interface to VT8233

Support ACPI 1.0b compliant power management

Support APM 1.2 compliant power management

(South) VIA VT8233

Built in high bandwidth 266MB/S 8-bit V-link Host controller

Integrated Fast Ethernet Controller with 1/10/100Mb capability

Integrated USB controller with three root hub and six function ports

Integrated dual channel UDMA 33/66/100 master mode EIDE controller

LPC interface for Low Pin Count interface to Super-I/O or ROM

Integrated Keyboard Controller with PS2 mouse support

Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM and Day/Month Alarm for ACPI

System Management Bus Interface

Sophisticated PC99-Compatible Mobile Power Management

Integrated Plug and Play Controller

Front Side Bus

100/133 Mhz (BIOS adjustable)

400 Mhz (NetBurst)

Form Factor

ATX

Memory: 3 x 168 pin SDRAM Socket

Support PC 100/133 compliant SDRAM up to 1.5GB (un-buffered) capacity

Support PC 100/133 compliant SDRAM up to 3GB (registered) capacity

Audio: AC97 audio

AC'97 2.2 compliant CODEC on board

Expansion Slot

Support both AGP 1.5/3.3V electrical signal

Support 1X, 2X, 4X AGP data transfer

5 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

1 x CNR Riser

Support CNR riser card for Modem function

IDE: Built in VT8233

l 2 x UltraDMA/100 Bus Master IDE Channel from VT8233

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

LPC I/O: ITE 8705F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

* Supports two standard Serial Ports

* Supports IrDA 1.0/ASKIR protocols

* Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

* Standard mode -- Bi-directional SPP compliant

* Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

* High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

* Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

* Enhanced digital data separator

* 3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

H/W Monitoring: Built in ITE 8705F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Bios: Award PnP BIOS

Stored in 2 Mb flash memory

SMBios 2.3

BIOS FSB setting from 100/103/107/110/133/134/137/140/142/145MHz

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports

1x Game / MIDI Port

1x Line in, 1x Line out, 1x Mic

Connectors:

1 x ATX power connector

2 x Fan Power connectors

2 x UltraDMA/100 Bus Master IDE

1 x Floppy

Jumpers:

Clear CMOS

BIOS flash block protection

Headers:

2 sets of dual Front Panel USB header

Audio header (MIC/speaker-out)

2 x CD_in

Wake On LAN

Wake On Modem

SIR

Other Features:

Suspend switch and LED

Accessory

1 CD-ROM Disk:

VIA 4 in 1 Driver

VIA Audio driver

User manuals in PDF format

IDE Cable:

1 x ATA 100/66 cable

Floppy Cable:

1 x Floppy cable

User manual:

1 printed user manual

Other:

Chipset heat sink