| AV47GT/R
Form Factor: ATX
CPU Support: Socket 478
Intel Pentium 4 / Celeron in
the 478 pin package with 400/533MHz
PSB (Processor Sid Bus)
Chipsets: (North) VIA P4X400
Support Pentium 4 400/533MHz
System bus
Support PC1600/2100/2700 DDR
SDRAM interface
Support AGP 3.0 compliant
interface
Support V-Link 8X interface to
VT8235
Support ACPI 1.0b compliant
power management
Support APM 1.2 compliant
power management
(South) VIA VT8235
Built in high bandwidth
533MB/S 8-bit V-link Host controller
Integrated USB 2.0 compliant
controller with three root hub and six
function ports
Integrated dual channel UDMA
33/66/100/133 master mode EIDE
controller
LPC interface for Low Pin
Count interface to Super-I/O or ROM
Integrated Keyboard Controller
with PS2 mouse support
Integrated DS12885-style Real
Time Clock with extended 256 byte
CMOS RAM and Day/Month Alarm for ACPI
System Management Bus
Interface
Sophisticated PC99-Compatible
Mobile Power Management
Integrated Plug and Play
Controller
Memory: 4 x 184 pin DDR SDRAM
Socket
Support PC1600/2100/2700
compliant DDR SDRAM up to 3GB
(un-buffered) capacity
Support PC1600/2100/2700
compliant DDR SDRAM up to 4GB
(registered) capacity
Audio: 6 channel audio
Realtek ALC650 on board
18-bit ADC and DAC resolution
Compliant with AC’97 2.2
specifications
6 channel slot selectable DAC
output for multi-channel applications
3D Stereo enhancement
Digital S/PDIF output.
Digital S/PDIF input.
Expansion Slot: 1 x AGP 3.0
compliant slot
Support external AGP V2.0 /
3.0 compliant VGA device
Support 0.8V / 1.5V AGP
electrical device only
Support 4X, 8X AGP data
transfer
Integrated AGP-proof circuit
to prevent the electrical damage by 3.3V
AGP card
5 x PCI slots
PCI 2.2 compliant, 32-bit BUS
Master Slots
133 Mbyte / sec maximum
throughput
IDE interface: On board High
Point 372 (AV47GTR only)
2 x UltraDMA/100/133 Bus
Master IDE from VT8235
2 x UltraDMA/133 Bus Master
IDE from High Point 372 to support
RAID 0, RAID1, RAID0+1 function (AV47GTR only)
80-pin Cable Backward
Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW,
and LS-120 Supports
USB 2.0 interface: Built in
VT8235
Complies with Universal Serial
Bus Specification Rev. 2.0
Complies with Enhanced Host
Controller Interface Specification for
USB
High performance USB 2.0 host
with integrated USB 2.0 transceiver,
which supports high-speed, full-speed and low-speed signaling
LPC I/O: ITE 8705F
Comply with Intel Low Pin
Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial
Ports
Supports IrDA 1.0/ASKIR
protocols
Supports Smart Card Reader
protocols
IEEE 1284 Parallel Port
Standard mode --
Bi-directional SPP compliant
Enhanced mode -- EPP V. 1.7
and V. 1.9 compliant
High speed mode -- ECP, IEEE
1284 compliant
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/
1.44M/ 2.88M floppy disk drives
Enhanced digital data
separator
3-Mode drives supported
Game Port
Dedicated MIDI Interface
Support power-failure resume
and power button de-bounce
H/W Monitoring: Built in ITE
8705F
2 thermal inputs from remote
thermal resistor to monitor system
temperature
1 thermal inputs from thermal
diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer
inputs
Smart Guardian Controller to
provide programmable fan speed
automatic control
Power Management:
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system
suspend types- suspend to DRAM,
suspend to disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb flash memory
DMI 2.3
CPU 100 / 133MHz FSB setting
BIOS FSB step-less setting
from 100MHz to 200MHz with 1 MHz
increment
CPU core voltage setting from
+0.025V ~ +0.20V
AGP (Vddq) voltage setting
from +0.05V ~ +0.20V
I/O voltage setting from +0.1V
~0.2V
Support IRQ manual assign
table
Bootable from Floppy, ATAPI
device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back
panel):
Back Panel:
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB 1.1 / 2.0 complaint
Ports
1x Game / MIDI Port
1x Line in, 1x Line out, 1x
Mic
Connectors:
1 x ATX power connector
1 x 4 pin 12V ATX power
connector
1 x 6 pin 5V / 3.3V ATX power
connector
4 x Fan Power connectors (one
for system chipset fan)
4 x UltraDMA/100/133 Bus
Master IDE (2 Raid IDE for AV47GTR
only)
1 x Floppy
Jumpers:
Clear CMOS
BIOS Boot block protection
Headers:
2 sets of 2 x 5 pin Front
Panel USB 2.0 compliant header
Mini CD Audio in
TAD in
CD Audio in
SPDIF IN / OUT
IrDA
Other Features:
Suspend switch and LED
|
|
