規格:

CPU Support: Socket 478

Intel Pentium 4 in the 478 pin package

Chipsets

(North) Intel 845 MCH Hub

Support Pentium 4 System bus

Support PC133 SDRAM interface

Support AGP4x interface

Support Hub interface to ICH2

Support ACPI 1.0b compliant power management

Support APM 1.2 compliant power management

(South) ICH2

Built in AC'97 Controller

Support UDMA 33/66/100 IDE interface

Support USB interface

Built in Integrated LAN MAC

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

Supports PCI interface

Form Factor

Micro ATX

Memory: 2 x 168 pin SDRAM Socket

Support PC133 compliant un-buffer / ECC SDRAM up to 2GB capacity

H/W Audio: C-Media 8738-PCI-6CH/LX

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode

HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface

Legacy SBPRO compatible

Expansion Slot: 1 x AGP 2.0 compliant slot

Support external AGP V2.0 compliant VGA device

Support 1.5V AGP electrical only

Support 4X AGP data transfer

3 x PCI slots

- PCI 2.2 compliant, 32-bit BUS Master Slots

- 133 Mbyte / sec maximum throughput

IDE interface

2 x UltraDMA/100 Bus Master IDE from ICH2

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

LPC I/O: ITE 8712F

- Comply with Intel Low Ports

- Supports IrDA 1.0/ASKIR protocols

- Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

- Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

- Enhanced digital data separator

- 3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

H/W Monitoring: Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

- Support multiple system suspend types-suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Bios: Award PnP BIOS

Stored in 2 Mb LPC flash memory

DMI 2.3

FSB step-less setting from 100MHz to 166MHz with 1 MHz increment

Vcore setting form 1.1V to 1.85V per 0.025V

Multiplier setting from 8x to 24x

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports

1 x Game / MIDI Port

1 x Line in, 1 x Line out, 1 x Mic

Connectors:

1 x ATX power connector

1 x 4 pin 12V ATX power connector

1 x 6 pin 5V / 3.3V ATX power connector

4 x Fan Power connectors (one for system chipset fan)

2 x UltraDMA/100 Bus Master IDE

1 x Floppy

Jumpers:

Clear CMOS

Front Audio Panel

Headers:

1 sets of 2 x 5 pin Front Panel USB header

1 x Central/Bass Audio Out (Optional)

AUX in (Small type connector)

CD Audio in

IR

Other Features:

Suspend switch and LED

Accessory:

CD-ROM Disk:

Intel IDE Driver

Intel INF installation utility

Audio CODEC driver

CMEDIA Audio driver (optional)

CMEDIA Audio Utility (optional)

ITE Smart Guardian Utility

User manuals in PDF format

IDE Cable:

1 x ATA 100/66 cable

1 x ATA 33 cable (optional)

Floppy Cable:

1 x Floppy cable

Audio Cable:

1 x audio cable for C-Media H/W Audio

User manual:

1 printed user manual

Others:

Chipset heat sink