也没多坏，只是我在网上想找一个很好又很不好的朋友（对不起网络故障）

規格:

CPU Support: Socket 478

Intel Pentium 4 in the 478 pin package

Chipsets:

(North) Intel 845 MCH Hub

Support Pentium 4 System bus

Support AGP4x interface

Support Hub interface to ICH2

Support ACPI 1.0b compliant power management

Support APM 1.2 compliant power management

(South) ICH2

Built in AC'97 Controller

Support UDMA 33/66/100 IDE interface

Support USB interface

Built in Integrated LAN MAC

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

Supports PCI interface

Memory: 2 x 184 pin DDR SDRAM Socket

l Support DDR 200/266 compliant un-buffer / ECC SDRAM up to 2GB capacity

Audio: AC97 audio

AC'97 2.1 compliant CODEC on board

Expansion Slot: 1 x AGP 2.0 compliant slot

Support external AGP V2.0 compliant VGA device

Support 1.5V AGP electrical only

Support 1X, 2X, 4X AGP data transfer

3 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

1 x CNR slots

CNR 1.1 compliant

Ethernet

On board Realtek 8100

IEEE 802.3u 100Base-T specifications compliant

10 Mb/s and 100 Mb/s operation

Supports Wake-On-LAN function

IDE:

2 x UltraDMA/100 Bus Master IDE from ICH2

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

LPC I/O: ITE 8712F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

Supports two standard Serial Ports

Supports IrDA 1.0/ASKIR protocols

Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Keyboard Controller

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

H/W Monitoring: Built in ITE 8712F

2 thermal inputs from remote thermal resistor to monitor system temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed automatic control

Power Management

APM 1.2 compliant

ACPI 1.0 compliant

Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up

Bios: Award PnP BIOS

Stored in 2 Mb LPC flash memory

DMI 2.3

CPU 100 / 133MHz FSB setting

BIOS FSB step-less setting from 100MHz to 166MHz with 1 MHz increment

Support IRQ manual assign table

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

Back Panel:

2 Serial Ports

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports

1x Game / MIDI Port

1x Line in, 1x Line out, 1x Mic

Connectors:

1 x ATX power connector

1 x 4 pin 12V ATX power connector

1 x 6 pin 5V / 3.3V ATX power connector

3 x Fan Power connectors

2 x UltraDMA/100 Bus Master IDE

1 x Floppy

Jumpers:

Clear CMOS

BIOS Boot block protection

Headers:

1 sets of 2 x5 pin Front Panel USB header

AUX in (Small type connector)

CD Audio in

Other Features:

Suspend switch and LED

Accessory: CD-ROM Disk

Intel IDE Driver

Intel INF installation utility

Audio CODEC driver

Realtek Ethernet driver

ITE Smart Guardian Utility

User manuals in PDF format

IDE Cable:

1 x ATA 100/66 cable

Floppy Cable:

1 x Floppy cable

User manual:

1 printed user manual

Chipset heat sink