規格:

CPU Support: Socket A

AMD Athlon with 200/266 MHz FSB/ Duron with 200/266 MHz FSB

AMD Athlon XP CPU with 266MHz FSB

Chipsets: VIA KM266

(North) VIA VT8375

High Performance Athlon CPU Interface

Integrated full featured S3 ProSavage8 128-bit 2D/3D

Accelerated Graphics Port(AGP) controller

Integrated high bandwidth 266MB/S 8-bit Vlink Host controller

Integrated advanced high performance DDR SDRAM controller

(South) VIA VT8233A

Built in high bandwidth 266MB/S 8-bit V-link Host controller

Integrated USB 1.1 controller

Integrated dual channel UDMA 133/100/66 master mode EIDE controller

LPC interface for Low Pin Count interface to Super-I/O or ROM

Integrated Keyboard Controller with PS2 mouse support

Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM and Day/Month Alarm for ACPI

System Management Bus Interface

Sophisticated PC99-Compatible Mobile Power Management

Integrated Plug and Play Controller

Form Factor:

Micro-ATX

Memory

2 x 184 pin DDR SDRAM Socket

Supports 4 banks up to PC1600/2100 compliant 2 GB DRAMs (512Mb x8/x16 DRAM technology) for un-buffered / register DDR SDRAM module

Graphics:S3 ProSavage8 embedded in KM266

Support AGP 2.0 compliant, 1X, 2X, 4X AGP device

Supports SideBand Addressing (SBA) mode (non-multiplexed address / data)

Audio

VIA Audio driver with AC97 compliant CODEC

10/100 Fast Ethernet(MK32N only):

Onboard Realtek 8100B Fast Ethernet controller

Supports 10/100 MHz full and half duplex operation

Expansion Slot:3 x PCI slots

PCI 2.2 compliant

Support 32 bit PCI master mode device

133 Mbyte/sec Maximum Throughput

LPC I/O:ITE 8705F

Meet LPC Spec. 1.01

Integrate Hardware Monitor functions

Support two 3.5-inch or 5.25-inch floppy disk drives

Two high-speed 16550 compatible UARTs

Support IrDA version 1.0 SIR, Consumer IR with Wake-Up function

Support PS/2 compatible bi-directional parallel port

Support Enhanced Parallel Port (EPP) - Compatible with IEEE 1284 specification

Support Extended Capabilities Port (ECP) - Compatible with IEEE 1284 specification

Game/Midi Port

H/W Monitor: On board ITE 8705F

Built-in 8-bit Analog to Digital Converter

2 thermal inputs from remote thermistors or thermal diode or diode-connected transistor

6 voltage monitor inputs (VBAT is measured internally.)

Monitors 2 Fan tachometer inputs

IDE interface:Built in VT8233A

Dual channel master mode PCI supporting four Enhanced IDE devices

Transfer rate up to 133MB/sec to cover PIO mode 4, multi-word DMA mode 2 drives, and UltraDMA-33 interface and increased reliability using UltraDMA-66/100/133 transfer protocols

On board 2 IDE ports

Power Management

ACPI v1.0 Compliant

APM v1.2 Compliant

Supports multiple system suspend types: power-on suspends with flexible CPU/PCI bus reset options, suspend to DRAM, and suspend to disk (soft-off), all with hardware automatic wake-up

Multiple suspend power plane controls and suspend status indicators

BIOS: Built in 2Mb Flash RO

Award PnP BIOS

DMI 2.3

Bootable from LS120, ZIP drive, CD-ROM, SCSI

On Board Ports / Connectors / Jumpers / Headers (front/back panel)

Ports:

2 x IDE

1 x Floppy

Connectors:

1 x PS/2 Keyboard

1 x PS/2 Mouse

2 x USB

1 x RJ45 Ethernet connector (MK32N only)

1 x COM

1 x Parallel

1x Game / MIDI Port

1x Line in, 1x Line out, 1x Mic

Jumpers:

Clear CMOS

Headers:

2 x USB

2 x FAN

Front Panel Audio Speaker_out, Mic_in

Wake On Lan

IR header

Front Panel for Power_LED, Power_On, Speaker, Reset, IDE_LED

System temperature detect with fixed sensor

Accessory:

CD-ROM Disk:

VIA 4-1 driver

VIA audio driver

S3 ProSavage8 VGA driver

Realtek Ethernet driver

User manual in PDF file

Cables:

1 x UDMA 66/100 cable

1 x Floppy cable

1 x Com2 cable

User manual:

1 x print user manual

I/O Shielding:

1 x Back panel I/O shielding