主機板
規格:
CPU Support: Socket 478
Intel Pentium 4 in the 478 pin package
Chipsets: VIA P4M266 (VT8751)
(North) VIA P4M266 (VT8751):
Support Pentium 4 System bus
Support DDR 200/266 SDRAM and PC100/133 SDRAM interface
Support AGP interface
Integrated S3 Savage4 2D/3D graphics controller and video accelerator
Support V-Link interface to VT8233
Support ACPI 1.0b compliant power management
Support APM 1.2 compliant power management
(South) VIA VT8233
Built in high bandwidth 266MB/S 8-bit V-link Host controller
Integrated USB controller with three root hub and six function ports
Integrated dual channel UDMA 33/66/100 master mode EIDE controller
LPC interface for Low Pin Count interface to Super-I/O or ROM
Integrated Keyboard Controller with PS2 mouse support
Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM
and Day/Month Alarm for ACPI
System Management Bus Interface
Sophisticated PC99-Compatible Mobile Power Management
Integrated Plug and Play Controller
Form Factor
Micro ATX
Front Side Bus
100 / 133MHz (Bios adjustable)
Memory: 2 x 184 pin DDR SDRAM Socket
Support 2.5V DDR 200/266 compliant SDRAM up to 2GB (registered)
or 1GB (unbuffered)
2 x 168 pin SDRAM Socket
Support 3.3V PC100/133 compliant SDRAM up to 2GB (registered)
or 1GB (unbuffered)
Audio: AC97 audio
AC'97 2.1 compliant CODEC on board
Expansion Slot
1 x AGP 2.0 compliant slot
Support external AGP V2.0 compliant VGA device
Support both 1.5V / 3.3V AGP electrical device
Support 2X, 4X AGP data transfer
2 x PCI slots
PCI 2.2 compliant, 32-bit BUS Master Slots
133 Mbyte / sec maximum throughput
1 x CNR slot
Support CNR riser card for Modem function
Ethernet
On board VIA VT6103 (Fast Ethernet PHY/Transceiver)
IEEE 802.3u 100Base-T specifications compliant
10 Mb/s and 100 Mb/s operation
Supports Wake-On-LAN function
IDE interface:Built in VT8233
2 x UltraDMA/100 Bus Master IDE Channel from VT8233
ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports
LPC I/O:ITE 8705F
Comply with Intel Low Pin Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial Ports
Supports IrDA 1.0/ASKIR protocols
Supports Smart Card Reader protocols
IEEE 1284 Parallel Port
Standard mode -- Bi-directional SPP compliant
Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant
High speed mode -- ECP, IEEE 1284 compliant
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives
Enhanced digital data separator
3-Mode drives supported
Game Port
Dedicated MIDI Interface
Support power-failure resume and power button de-bounce
H/W Monitoring:Built in ITE 8705F
3 thermal inputs from remote thermal resistor to monitor CPU, power, and
system temperature
8 voltage monitor inputs
Monitors 2 fan tachometer inputs
Power Management
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system suspend types - suspend to DRAM, suspend to disk,
and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb flash memory
DMI 2.3
Support IRQ manual assign table
Bootable from Floppy, ATAPI device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back panel): Ports
Back Panel:
1 VGA Port
1 RJ45 Lan Port and 2 USB Ports
1Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
1x Game / MIDI Port
1x Line in, 1x Line out, 1x Mic in
Connectors:
1 x ATX power connector
2 x Fan Power connectors (one for system chipset fan)
2x UltraDMA/100 Bus Master IDE
1 x Floppy
Jumpers:
CPU Clock
DRAM Voltage
DRAM Type (DDR or SDR)
Clear CMOS
BIOS Boot block protection
Keyboard Power-on
Headers:
2 sets of dual Front Panel USB header
Audio header (MIC/speaker-out)
2 x CD_in
Wake On LAN
Wake On Modem
SIR
Accessory:CD-ROM Disk
VIA 4 in 1 Driver
VIA Audio driver
User manuals in PDF format
IDE Cable:
1 x ATA 100/66 cable
Floppy Cable:
1 x Floppy cable
USB cable:
1 x dual port USB cable (Optional)
User manual:
1 printed user manual
1 I/O Shielding Panel