AK32L 主機板

規格:

Chipset:VIA KT266

(North bridge) VIA VT8366

High Performance Athlon CPU Interface

Integrated full featured Accelerated Graphics Port (AGP) controller

Integrated high bandwidth 266MB/S 8-bit Vlink Host controller

Integrated advanced high performance DDR DRAM controller

(South bridge) VIA VT8233

Built in high bandwidth 266MB/S 8-bit Vlink Host controller

Integrated USB controller with three root hub and six function ports

Integrated dual channel UDMA 33/66/100 master mode EIDE controller

LPC interface for Low Pin Count interface to Super-I/O or ROM

Integrated Keyboard Controller with PS2 mouse support

Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM and Day/Month Alarm for ACPI

System Management Bus Interface

Sophisticated PC99-Compatible Mobile Power Management

Integrated Plug and Play Controller

Front Side Bus

Including 100-133 MHz (BIOS step-less adjustable)

Form Factors

ATX

CPU Support: Socket A CPU

AMD Duron CPU with 200MHz FSB

AMD Athlon CPU with 200 / 266MHz FSB

AMD Athlon XP CPU with 266MHz FSB

Multiplier

Jumper-less (BIOS adjustable)

Memory: 2 x 184-pin DIMM 2 x 168-pin DIMM

Supports 4 banks up to 2 GB DRAMs (512Mb x8/x16 DRAM technology) for register DDR SDRAM module

Supports 4 banks up to 1 GB DRAMs (512Mb x8/x16 DRAM technology) for unbuffered SDR SDRAM module

Graphics

N/A

Display Cache

N/A

Audio

VIA AC 97 audio

USB Hub: Built in VT8233

Integrated USB Controller with three root hubs and six function ports

USB v.1.1 and Intel Universal HCI v.1.1 compatible

Support up to 6 ports

Expansion Slot

AGP: 1 AGP slot

Support AGP 2.0 compliant, 1X, 2X, 4X AGP device

Supports SideBand Addressing (SBA) mode (non-multiplexed address / data)

PCI: 5 PCI slots, PCI 2.2 compliant

Support 32 bit PCI master mode device

133 Mbyte/sec Maximum Throughput

I/O: Winboad 83697HF

Meet LPC Spec. 1.01

Integrate Hardware Monitor functions

Support up to four 3.5-inch or 5.25-inch floppy disk drives

Two high-speed 16550 compatible UARTs

Support IrDA version 1.0 SIR, SHARP ASK-IR Consumer IR with Wake-Up function

Support PS/2 compatible bi-directional parallel port

Support Enhanced Parallel Port (EPP) - Compatible with IEEE 1284 specification

Support Extended Capabilities Port (ECP) - Compatible with IEEE 1284 specification

Game Port

MIDI Port

IDE: Built in VT8233

Dual channel master mode PCI supporting four Enhanced IDE devices

Transfer rate up to 33MB/sec to cover PIO mode 4, multi-word DMA mode 2 drives, and UltraDMA-33 interface and increased reliability using UltraDMA-66/100 transfer protocols

On board 2 IDE port

H/W Monitoring: Built in Winbond 83697HF

Smart fan control system, support "Thermal Cruise" and "Speed Cruise"

2 thermal inputs from CPU and system temperature sensor

6 positive voltage inputs (+12V, -12V, +5V, -5V, +3.3V, Vcore)

2 intrinsic voltage monitoring (Vbat, +5VSB)

2 fan speed monitoring inputs

2 fan speed control

Build in Case open detection circuit

WATCHDOG comparison of all monitored values

Programmable hysteresis and setting points for all monitored items

Over temperature indicate output

Automatic Power On voltage detection Beep

Issue SMI#, IRQ, OVT# to activate system protection

Winbond Hardware Doctor

Support Intel LDCM TM / Acer ADM compatible

Power Management

ACPI v1.0 Compliant

APM v1.2 Compliant

Supports multiple system suspend types:

power-on suspends with flexible CPU/PCI bus reset options, suspend to DRAM, and suspend to disk (soft-off), all with hardware automatic wake-up

Multiple suspend power plane controls and suspend status indicators

Thermal alarm on either external temperature sensing circuits

Support Power Fail Resume function

 

Bios:Built in 2 Mb Flash ROM

Bios:

Support Power Fail Resume function

Award PnP BIOS

DMI 2.3

Bios FSB and Multiplier setting from 100MHz to 166MHz

BIOS Multiplier setting from 5X to 12.5X

CPU core voltage setting from +0.025V ~ +0.20V

Support IRQ manual assign table

 

On Board Ports / Connectors / Jumpers / Headers (front/back panel):

On Board Ports / Connectors / Jumpers / Headers (front/back panel):

Ports:

2 x IDE

1 x Floppy

Connectors:

1 x PS/2 Keyboard

1 x PS/2 Mouse

2 x USB

2 x COM

1 x Parallel

Jumpers:

Clear CMOS

BIOS boot block protection

Headers:

4 x USB

4 x FAN

Wake On Lan

Front Panel for Power_LED, Power_On, Speaker, Reset, IDE_LED

Intrusion detect

System temperature detect with fixed sensor

Accessory: CD-ROM Disk:

VIA 4-1 driver

VIA audio driver

User manual in PDF file

IDE Cable:

1 x UDMA 66/100 cable

Floppy Cable:

1 x Floppy Cable

User manual:

1 x print user manual

1 x Heat Sink attached on north bridge chipset

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我