| AV40SV3
Form Factor: ATX
CPU Support: Socket 478
Intel Pentium 4 / Celeron in
the 478 pin package with 400/533MHz
FSB
Chipsets: (North) VIA P4X266A
Support Pentium 4 System bus
Support DDR 200 / 266 SDRAM
interface
Support AGP interface
Support V-Link interface to
VT8233A
Support ACPI 1.0b compliant
power management
Support APM 1.2 compliant
power management
(South) VIA VT8233A
Built in high bandwidth
266MB/S 8-bit V-link Host controller
Integrated USB controller with
two root hub and four function ports
Integrated dual channel UDMA
33/66/100/133 master mode EIDE
controller
LPC interface for Low Pin
Count interface to Super-I/O or ROM
Integrated Keyboard Controller
with PS2 mouse support
Integrated DS12885-style Real
Time Clock with extended 256 byte
CMOS RAM and Day/Month Alarm for ACPI
System Management Bus
Interface
Sophisticated PC99-Compatible
Mobile Power Management
Integrated Plug and Play
Controller
Memory: 3 x 184 pin DDR SDRAM
Socket
Support PC1600/2100 compliant
DDR SDRAM up to 3GB
(un-buffered) capacity
Support PC1600/2100 compliant
DDR SDRAM up to 3GB (registered)
capacity
Audio: AC97 audio
AC ¡¯97 2.1 compliant CODEC on board
QRR04-01-01
Expansion Slot: 1 x AGP 2.0
compliant slot
Support external AGP V2.0
compliant VGA device
Support both 1.5V / 3.3V AGP
electrical device
Support 2X, 4X AGP data
transfer
4 x PCI slots
PCI 2.2 compliant, 32-bit BUS
Master Slots
133 Mbyte / sec maximum
throughput
1 x CNR slot
Support CNR riser card for
Modem function
IDE interface: Built in VT8233A
2 x UltraDMA100/133 Bus Master
IDE Channel from VT8233
ATAPI IDE CD-ROM, CD-R, CD-RW,
and LS-120 Supports
LPC I/O: ITE 8705F
Comply with Intel Low Pin
Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial
Ports
Supports IrDA 1.0/ASKIR
protocols
Supports Smart Card Reader
protocols
IEEE 1284 Parallel Port
Standard mode --
Bi-directional SPP compliant
Enhanced mode -- EPP V. 1.7
and V. 1.9 compliant
High speed mode -- ECP, IEEE
1284 compliant
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/
1.44M/ 2.88M floppy disk drives
Enhanced digital data
separator
3-Mode drives supported
Game Port
Dedicated MIDI Interface
Support power-failure resume
and power button de-bounce
H/W Monitoring: Built in ITE
8705F
2 thermal inputs from remote
thermal resistor to monitor system
temperature
1 thermal inputs from thermal
diode to monitor CPU temperature
5 voltage monitor inputs
Monitors 2 fan tachometer
inputs
Power Management:
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system
suspend types- suspend to DRAM,
suspend to disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb flash memory
DMI 2.3
Support IRQ manual assign
table
Bootable from Floppy, ATAPI
device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back
panel):
Ports:
Back Panel:
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB Ports
1x Game / MIDI Port
1x Line in, 1x Line out, 1x
Mic in
Connectors:
1 x ATX power connector
2 x Fan Power connectors (one
for system chipset fan)
2 x UltraDMA/100 Bus Master
IDE
1 x Floppy
Jumpers:
Clear CMOS
BIOS Boot block protection
Headers:
1 set of dual Front Panel USB
header
Audio header (MIC/speaker-out)
2 x CD_in
Wake On LAN
Wake On Modem
SIR
|
|
