| MB47(N)
MB47(N)
Form Factor: Micro ATX
CPU Support: Socket 478
Intel Pentium 4 / Celeron in
the 478 pin package with 400MHz FSB
Chipsets: (North) Intel 845GL
MCH Hub
Support Pentium 4 System bus
Support DDR200/266 DDR SDRAM
interface
Built in Intel 3D Graphics
Engine
Support Hub interface to ICH4
Support ACPI 1.0b compliant
power management
Support APM 1.2 compliant
power management
(South) ICH4
Built in AC’97 audio
controller
Support UDMA 33/66/100 IDE
interface
Support USB 2.0 interface
Support dual ultra ATA100
controller
Support ACPI 1.0b compliant
power management
Built in RTC (Real Time Clock)
Supports PCI interface
Memory: 2 x 184 pin DDR SDRAM
Socket
Support PC1600/2100 compliant
DDR SDRAM up to 2GB capacity
Audio: 4 channel audio
C-Media 9738 on board
Compliant with AC’97 2.2
specifications
4 channel slot selectable DAC
output for multi-channel applications
3D Stereo enhancement
Expansion Slot: 3 x PCI slots
PCI 2.2 compliant, 32-bit BUS
Master Slots
133 Mbyte / sec maximum
throughput
1 x CNR slots
Ethernet: On board Realtek 8100B
(MB47N only)
IEEE 802.3u 100Base-T
specifications compliant
10 Mb/s and 100 Mb/s operation
Supports Wake-On-LAN function
IDE interface: ICH4
2 x UltraDMA/100 Bus Master
IDE from ICH4
80-pin Cable Backward
Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW,
and LS-120 Supports
I/O: Winbond 83627HF
Meet LPC Spec. 1.01
Integrate Hardware Monitor
functions
Support up to four 3.5-inch or
5.25-inch floppy disk drives
Two high-speed 16550
compatible UARTs
Support IrDA version 1.0 SIR,
SHARP ASK-IR Consumer IR with
Wake-Up function
Support PS/2 compatible
bi-directional parallel port
Support Enhanced Parallel Port
(EPP) - Compatible with IEEE 1284
specification
Support Extended Capabilities
Port (ECP) - Compatible with IEEE
1284 specification
Game Port
MIDI Port
Keyboard Controller
H/W Monitoring: Built in Winbond
83627HF
Smart fan control system,
support “Thermal Cruise” and “Speed
Cruise
2 thermal inputs from CPU and
system temperature sensor
6 positive voltage inputs
2 intrinsic voltage monitoring
2 fan speed monitoring inputs
2 fan speed control
WATCHDOG comparison of all
monitored values
Power Management:
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system
suspend types- suspend to DRAM,
suspend to disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb LPC flash
memory
DMI 2.3
Bootable from Floppy, ATAPI
device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back
panel):
Ports:
Back Panel:
1 Serial Port
1 VGA Port
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB2.0 Ports
1 LAN Port (MB47N only)
1 Game / MIDI Port
1 Line in, 1x Line out, 1x Mic
Connectors:
1 x ATX power connector
1 x 4-pin ATX 12V power
connector
3 x Fan Power connectors
2 x UltraDMA/100 Bus Master
IDE
1 x Floppy
1 x COM 2 connector
Jumpers:
Clear CMOS
Boot ROM Protection
Headers:
2 sets of 2 x 5 pin USB2.0
header
CD Audio in
IrDA header
Wake on Lan header
|
|
