MS54(N)

Form Factor: Micro ATX

CPU Support: Socket 478

Intel Pentium 4 / Celeron in the 478 pin package with 400MHz FSB

Chipsets:

(North) SiS 405GL

Supports Intel ® Pentium ® 4 processor system bus at 100 MHz (400

MHz Data Bus)

2 Unbuffered DIMM of PC 1600/2100 compliant DDR SDRAM up to 2

GB memory capacity

Built in SiS 3D graphics engine

High Throughput SiS MuTIOL connect to SiS961 MuTIOL Media I/O

to perform 533MB/s bandwidth

(South) SiS961

Built in AC97 Controller

Support UDMA 33/66/100 IDE interface

Integrated 2 USB 1.1 compliant host controller to support up to 6 USB

ports

Support ACPI 1.0b compliant power management

Built in RTC (Real Time Clock)

PCI interface supports PCI 2.2 compliant device

Memory: 2 x 184-pin DIMM

Supports 4 banks up to 2 GB PC1600/2100 compliant DDR SDRAM

Audio: 4 channel audio

C-Media 9738 on board

Compliant with AC’97 2.2 specifications

4 channel slot selectable DAC output for multi-channel applications

3D Stereo enhancement

Expansion Slot: 3 x PCI slots

PCI 2.2 compliant, 32-bit BUS Master Slots

133 Mbyte / sec maximum throughput

1 x CNR slots

IDE interface: Built in SiS 961

2 x UltraDMA/100 Bus Master IDE from SiS961

80-pin Cable Backward Compatible Legacy ATAPI Devices

ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports

LPC I/O: ITE 8705F

Comply with Intel Low Pin Count Interface Specification Rev. 1.0

ACPI V. 1.0 compliant

Built in H/W monitor feature

Two 16C550 UARTs

Supports two standard Serial Ports

Supports IrDA 1.0/ASKIR protocols

Supports Smart Card Reader protocols

Built in Smart Card Reader

IEEE 1284 Parallel Port

Standard mode -- Bi-directional SPP compliant

Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant

High speed mode -- ECP, IEEE 1284 compliant

Floppy Disk Controller

Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives

Enhanced digital data separator

3-Mode drives supported

Game Port

Dedicated MIDI Interface

Support power-failure resume and power button de-bounce

10/100 Fast Ethernet: On board Realtek 8100B (MS54N Only)

H/W Monitoring: Built in ITE 8705F

2 thermal inputs from remote thermal resistor to monitor system

temperature

1 thermal inputs from thermal diode to monitor CPU temperature

8 voltage monitor inputs

1 chassis intrusion input

Monitors 3 fan tachometer inputs

Smart Guardian Controller to provide programmable fan speed

automatic control

Power Management:

APM 1.2 compliant

ACPI 1.0 compliant

Support multiple system suspend types- suspend to DRAM,

suspend to disk, and all with hardware automatic wake-up

Bios: Award PnP BIOS

Stored in 2 Mb flash memory

DMI 2.3

Bootable from Floppy, ATAPI device, USB device, SCSI device

On Board Ports / Connectors / Jumpers / Headers (front/back

panel):

Ports:

Back Panel:

1 Serial Port

1 VGA Port

1 Parallel Port (SPP, EPP, ECP)

1 PS/2 Keyboard Port

1 PS/2 Mouse Port

2 USB Ports

1 LAN Port (MS54N Only)

1 Game / MIDI Port

1 Line in, 1x Line out, 1x Mic

Connectors:

1 x ATX power connector

1 x Serial Port connector

3 x Fan Power connectors

2 x UltraDMA/100 Bus Master IDE

1 x Floppy

Jumpers:

Clear CMOS

BIOS Boot block protection

Headers:

2 sets of 2 x5 pin Front Panel USB header

Mini CD Audio in

CD Audio in

Other Features:

Suspend switch and LED

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我