Thunder HEsl-T (S2688) Motherboard

Benefits and Applications

The Thunder HEsl-T is designed for mission-critical server applications requiring the power of dual processors, interleaved memory and high-bandwidth I/O performance. It supports two CPUs, including the Pentium III Processor or the Pentium III Processor with 512kB Cache. The Thunder HEsl-T also features an interleaved memory design, providing DDR-like bandwidth from an SDR design.This platform also features dual-channel LAN, optional SCSI, integrated VGA, and more. These features make our Thunder HEsl-T ideal for today's server applications.

Thunder HEsl-T Models

Standard Model

Integrated SCSI Controller

UPC Number

 S2688GN

No

 6 35872 006180

 S2688UGN

Yes

 6 35872 006173

Processor

Dual PGA370 ZIF sockets

Supports up to two Intel Pentium III Processors or Pentium III Processors with 512kB Cache

Single onboard VRMs supports both processors

FSB support for 100MHz and 133MHz

Chipset

ServerWorks ServerSet III HE-SL chipset

Integrated I/O APIC

CIOB20 I/O bridge and CSB5 south bridge

National NS87417 Super I/O ASIC

System Memory

Six 3.3v 168-pin DIMM sockets

Up to 6GB PC133 Registered SDRAM

Support ECC (72-bit) memory modules

Hardware Monitoring

Winbond W83782D hardware monitoring ASIC

CPU temperature, voltage, and fan speed monitoring

Expansion Slots

Three 64-bit 66MHz (5-volt) PCI slots. *

One 64-bit 66MHz (3.3-volt) PCI slot. *

3.3-volt slot supports Adaptec 2000S zero-channel RAID controller.

Two 32-bit 33MHz (5-volt) PCI slots.

Total of six usable slots

Note: Click the PCI slot on image above.

Integrated I/O

One floppy connector supports up to two drives

Two 9-pin 16550-based serial ports

One 25-pin SPP/ECP/EPP parallel port

Four USB ports (two via optional cable)

PS/2 keyboard and mouse ports

Integrated PCI IDE

Dual-channel master mode

Up to four Enhanced IDE devices

Support for ATA-66/33 compliant IDE and ATAPI compliant devices **

Integrated Graphics

ATI RAGE XL graphics accelerator

4MB frame buffer (SDRAM)

Standard 15-pin analog VGA ports

Integrated LAN Controllers

Dual LAN controllers (Intel 82559)

10/100Mbps data transfer rate per controller

Integrated SCSI Controller (optional)

Adaptec AIC-7899W controller

Dual-channel Ultra160 SCSI support

160MBps maximum data throughput per channel

Up to 15 LVD SCSI devices per channel

Integrated Server Management (optional)

Tyan Server Management Connector

Supports the Intelligent Platform Management Interfaces (IPMI)

Support for IPMI, SDR, SEC, FRU

One IPMB and two I2C serial interfaces

BIOS

AMI BIOS on 4Mb Flash ROM

Supports APM v1.2 and ACPI v1.0

User settings for hardware monitoring

Auto-configuration of IDE hard drive types

Multiple boot options

DMI 2.0 compliant

Form Factor

Extended ATX footprint

(13" x 12", 330.2mm x 304.8mm)

One 20-pin ATX power connector

Stacked parallel (one), serial (one) and VGA (one) ports

Stacked USB (two) ports

Side-by-side LAN (two with LED) ports

Stacked keyboard and mouse ports

Regulatory

FCC DoC (Declaration of Conformity)

European CE (Declaration of Conformity)

 

* 66MHz is supported when 66MHz PCI device is used and CPU has 133MHz FSB.

** Due to limitations of the ServerWorks chipset, IDE transfer rates are limited to PIO Mode 4 (16.6MB/sec).

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我