Benefits and Applications

The Thunder LE-T was specifically designed for the Internet infrastructure. It supports two CPUs; either the Pentium III processor, or the Pentium III processor DP. With its high-performance ServerWorks chipset, 64-bit PCI bus, and integrated network, storage and video controllers, the Thunder LE-T provides superior performance and a wealth of integrated features. The Thunder LE-T's most intriguing feature is its form factor. Utilizing angled memory sockets and a highly integrated design, the Thunder LE-T is the perfect choice for today's 1U/2U servers.

Standard Features

Processor

Dual PGA370 ZIF sockets

Supports up to two Intel Pentium III processors

Supports Intel's Pentium III processors DP.

One onboard VRM (VRM 8.5 spec) supports 2 CPUs

Front-Side Bus support for 100MHz and 133MHz

Chipset

ServerWorks ServerSet III LE3 chipset

Integrated I/O APIC

OSB4 south bridge

SMsC FDC37B787 Super I/O ASIC

System Memory

Four 25° angled 3.3v 168-pin DIMM sockets

Angled sockets enable rackmount installation

Supports up to 4GB Registered PC133 SDRAM

Supports ECC (72-bit) memory modules

Expansion Slots

Two 64-bit 66MHz (5-volt) PCI slots

Total of two usable slots (one if installed in 1U)

PCI riser card required when installed in 1U/2U

Integrated I/O

One floppy connector supports up to two drives; microfloppy support via optional cable

Two 9-pin 16550-based serial ports (one via optional cable)

One 25-pin SPP/ECP/EPP parallel port via optional cable

Four USB ports (two via optional cable)

PS/2 keyboard and mouse ports

Integrated PCI IDE

Dual-channel master mode

Up to four Enhance IDE devices

Support for DMA33 IDE and ATAPI-compliant devices *

Integrated LAN Controllers

Dual Intel 8255x LAN controllers

10/100Mbps maximum data transfer rate per controller

Integrated 2D/3D Graphics

ATI RAGE XL graphics controller

4MB frame buffer (SDRAM)

Standard 15-pin analog VGA port

Integrated IDE RAID (optional)

Promise FastTrak100 IDE RAID controller

Dual-channel master mode

Support up to four Enhanced IDE devices

Support for UDMA 100/66/33 IDE drives

Supports IDE RAID levels 0, 1 and 0+1

Integrated SCSI (optional)

Adaptec AIC-7899W controller

Dual-channel Ultra160 SCSI support

160MB/sec maximum data throughput per channel

Supports up to 15 LVD SCSI devices per channel

Hardware Monitoring

Winbond W83782D hardware monitoring ASIC

CPU temperature, voltage, and fan monitoring

BIOS

AMI BIOS on 4Mb Flash ROM

Auto-configuration of IDE hard drive types

Multiple boot options

DMI 2.0 compliant

Form Factor

ATX footprint (12" x 9.6", 304.8mm x 243.84mm)

One 20-pin ATX power connector

One serial port and one VGA port

Stacked USB (two) ports

Side-by-side LAN (two) ports

Stacked keyboard and mouse ports

Regulatory

FCC DoC (Declaration of Conformity)

European Community CE (Declaration of Conformity)