Benefits and Applications

The Tiger 200T is an ideal choice for cost-effective server applications. Boasting support for the new "Tualatin" series Pentium III processors, and featuring a 1U-capable design, this system board provides the power and form factor necessary for today's demanding server environments. With its integrated IDE RAID, VGA and dual LAN connections, the Tiger 200T is perfectly suited for desktop and rackmount servers. There are plenty of PCI slots for adding storage and network controllers, as well as four DIMM sockets that accept up to 1.5 gigabytes of high-speed PC133 SDRAM.

Standard Features

Processor

Dual PGA370 ZIF sockets (universal)

Supports two Intel Pentium III processors (FC-PGA)

Supports "Tualatin" series processors

Two onboard VRMs (VRM 8.5 spec)

Front-Side Bus supports 100MHz and 133MHz

Chipset

VIA Apollo Pro133T chipset

(VT82C694T & VT82C686B)

System Memory *

Four 168-pin 3.3v DIMM sockets

Supports up to 2/1.5GB of PC100/133 memory

Supports SDRAM and VCM SDRAM, including ECC

Hardware Monitoring

VIA VT82C686B hardware monitoring ASIC

3-pin fan monitoring headers

2-pin chassis intrusion header

Temperature and voltage monitoring

3-pin Wake on Modem (WoM) header

Expansion Slots

Five 32-bit 33MHz (5-volt) PCI slots

One ISA slot

Total of six usable slots

Integrated I/O

One floppy connector supports up to two drives

Two 9-pin 16550-based serial ports

(one port via cable)

One 25-pin SPP/ECP/EPP parallel port

Four USB Ports (two ports via optional cable)

PS/2 keyboard and mouse ports

Integrated LAN Controllers

Dual LAN controllers

- one 8255x controller

- one 8255x controller

10/100Mbps data transfer rate per controller

3-pin Wake on LAN (WoL) header

Integrated PCI IDE

Dual-channel master mode

Supports up to four Enhance IDE devices

Support for DMA 100/66/33 IDE and ATAPI compliant devices

Integrated IDE RAID

Promise FastTrak100 controller

Dual-channel master mode

Support up to four Enhanced IDE devices

Support for DMA 100/66/33 IDE drives

Supports IDE RAID Levels 0,1, and 0+1

Integrated 2D/3D Graphics

ATI RAGE XL graphics controller

4MB frame buffer

Standard 15-pin analog VGA port

BIOS

Award BIOS 2Mbit Flash ROM

User settings for hardware monitoring

Auto configuration of IDE hard drive types

Multiple boot options

DMI 2.0 compliant

Form Factor

ATX footprint (12" x 9.6", 304.8 x 243.84mm)

One 20-pin ATX power connector

Side-by-side serial (one) and VGA (one) ports

Stacked USB (two) ports

Side-by-side RJ45 LAN (two) ports with LED

Stacked keyboard and mouse ports

Regulatory

FCC DoC (Declaration of Conformity)

European Community CE (Declaration of Conformity)