| Benefits and Applications
Tyan Tigercub 100 is a quality, high performance single processor
system platform based on the powerful Intel Pentium?
II / III microprocessors. The Tigercub 100 is designed around the latest
and fastest Intel 440BX AGPset. Please refer to the Motherboard CPU
Compatibility Chart for more specs.
The Tigercub 100 supports SPD SDRAM memory and ECC SDRAM. The board's
PCI Local Bus and new 32-bit AGP bus provides high performance
capabilities that are ideal for a wide range of demanding applications
such as: CAD, CAM, CAE, real-time 3D, and simulations.
This integrated system board achieves the highest reliability and is
based on Micro- ATX form factor. Some of the features included are:
on-board dual channel PCI IDE, on-board floppy controller, on-board high
speed I/O, Universal Serial Bus, on-board PS/2 mouse connector, on-board
wavetable sound, and on-board system mangement.
Flexibility and expandibility have been designed into the Tigercub 100.
With I/O and drive controller support built on-board, the Tigercub 100
allows many upgrade paths not found on other boards.. With three 168-pin
DIMM sockets, the Tigercub 100 can provide a very flexible memory
configuration of up to 768MB SPD SDRAM or SDRAM+ECC in addition to the new
100 MHz SDRAMs.
Standard Features
Processor
Single Pentium? II/III (Celeron?
supported)
Up to 100 MHz BUS Support
One Slot 1 Connector (SEC)
On-board CPU Fan Headers
On-board Case Fan Headers
VRM component installed on board
Processor speeds: CPU compatibility chart
Chipset
Intel 440BX (100 MHz AGP set)
Latest Generation Pentium? II Chipset
National "351" Super I/O chipset
System Memory
Up to 768MB SDRAM Memory Support **
Synchronous DRAM W/SPD
SDRAM + ECC
Three 168-pin DIMM Sockets
100 MHz SDRAM support [ Compatiblity List ]
Expansion Slots
Three 32-bit PCI Bus Mastering Slots
One 16-bit ISA Slot
One 32-bit AGP Slot
One Shared PCI/ISA Slot (4 usable slots)
Disk Drive & System I/O
UltraDMA/33 (UIDE) built-in (up to 33MB/s DTR)
Two PCI Bus Mastering EIDE channels
Supports EIDE CD-ROMs
Bus-Mastering Mode 2 (Up to 22MB/s DTR)
PIO Mode 3 & 4 (Up to 17MB/s DTR)
Two Floppy Drive Support (Up to 2.88MB)
Two ATX Serial Ports (16550 UARTs)
One ATX ECP/EPP Parallel Port
2 ATX USB Rev 1.2 Ports
One IR (InfraRed) I/O Interface Port
One ATX PS/2 Mouse Port
One ATX PS/2 Keyboard Port
Integrated Audio
Ensoniq 1371 PCI Wavetable audio chip
AC97 codec / One ATX Game port
ATX Line in, MIC, and speaker ports
Voltage and Power
ATX Power Supply Connector
+12V Power Source for DC-FAN /w speed control
3.3V DRAM Support
Utilizes GTL+ Bus, Reducing Power Consumption and EMI
Power recovery after interrupt feature
Wake-on-LAN Feature Header (3-pin) ***
System Management
ADM9240 control chip with on-board alarm for heat, fan and voltage.
Reports to the operating system for system monitoring. Intel LANDesk?
Client Manager software optional.
Chassis Intrusion Detection capable
BIOS
Award Plug 'n' Play flash BIOS Standard
Deep Green / Energy Star / PC98 ready
Yellow LED for Sleep mode
Year 2000 compliant
Form Factor
Micro-ATX Design (7.5" x 9.0")
Double Row ATX Connectors
Type "C" I/O Shield (Intel Caymen Compatible)
Warranty
3 Year Manufacturer's Warranty
Specifications may change without notice
Package List
- Tigercub100 motherboard / User's manual
- 40-pin IDE & 34-pin floppy cable pack
- CPU retention module
- System Management & Driver CD
(Intel LANDesk optional) with Ensoniq
AudioPCI manual & installation
instructions
|
