Benefits and Applications

Tyan Tomcat i810 is a quality, performance single processor system platform based on the powerful Intel Pentium socketed Celeron microprocessors. This mainboard is designed around the Intel 810 AGPset. Please refer to the CPU Compatibility Chart for more specs.

The Tomcat i810 supports SPD SDRAM memory and ECC SDRAM. The board's PCI Local Bus and on-board Intel 3D Graphics accelerator provides graphics capabilities that are ideal for such applications as: appliance PC and other small footprint solutions.

This integrated system board achieves the highest reliability and is based on a double row micro-ATX form factor. Some of the features included are: on-board dual channel PCI IDE, floppy controller, high speed I/O, Universal Serial Bus, PS/2 mouse connector, AC-97 sound, and on-board 4 MB Display Cache.

Flexibility and expandibility have been designed into the Tomcat i810. With I/O and drive controller support built on-board, the Tomcat i810 allows many upgrade paths not found on other micro-ATX boards.. With two 168-pin DIMM sockets, the Tomcat i810 can provide a very flexible memory configuration of up to 512 MB SPD SDRAM or SDRAM+ECC in addition to the new 100 MHz SDRAMs.

**Note: This board conforms to the new PCI 2.2 spec. This requires 3.3v standby for all PCI slots, DIMM banks, and PS/2 outputs (KB/PS/2 Mouse). Always remember to unplug the AC power cord before adding any PCI cards, memory, or plugging or unplugging keyboard or mouse. Otherwise the motherboard may automatically power up when adding the component.

Standard Features

Processor

Single Socket 370

Celeron processor 300 MHz to 500+ MHz

Supports processor built-in 128K Cache

Front Side Bus support for 66 / 75* / 83* /95* /100 /105* /129* /133* MHz

Integrated VRM

Auto configure Clock Multiplier

Auto detect CPU Core Voltage

Processor speeds: CPU compatibility chart

Chipset

Intel 810 DC-100 AGPset

GMCH (DC100), ICH(801AA), 4 MB FWH

ITE 8702/12F LPC Super I/O Chipset

System Memory

Supports 8 MB to 512 MB

Synchronous DRAM W/SPD

SDRAM + ECC

Two 3.3V unbuffered 168-pin DIMM Sockets

PC100 compliant 100 MHz SDRAM support

[ Compatiblity List ]

Expansion Slots

Four 32-bit PCI Bus Mastering Slots

Shared AMR slot

Integrated I/O

One Floppy port (1.44 MB, 2.88 MB, 3-mode)

Two 9-pin 16550 UART Serial ports

One 25-pin ECP / EPP Parallel port

One Fast IR TX / RX header

Two USB rev 1.2 ports

PS/2 Mouse & Keyboard ports

Integrated PCI IDE

Two 40-pin IDE connectors for up to 4 drives

PIO Mode 3 / 4, UltraDMA 33 / 66 supported

ATAPI IDE CD-ROM and LS-120 supported

Integrated 2D/3D Graphics

Intel?810-DC100 DVMT 3D graphics engine

4 MB 100 MHz / 133 MHz SDRAM Display Cache, flat panel (optional)

Standard 15-pin Analog VGA port

Integrated Audio

Intel 810 digital link audio

AC-97 Codec on board

One MIDI / Game port

Line-in, MIC-in and Line-out ports

4-pin CD-ROM audio (ATAPI) header

Other Features

3-pin Wake on LAN header ***

3-pin Wake on Ring header

Two 3-pin Fan speed monitoring headers

2-pin Chassis Intrusion header

BIOS

AMI BIOS on 4 MB flash ROM (FWH)

Plug and Play

APM 1.2 / ACPI 1.0 / PC99 compliant

IDE drive auto configure

Soft power-down

Muliple boot options

Instanct PC (suspend to RAM) support

DMI 2.0 compliant

Hardware monitoring of CPU voltage, temperature and Fan status

ACPI Bi-color LED for PC99

Form Factor

Micro-ATX Design (9.6" x 7.4")

4-Layer board

20-pin ATX power connector

Stacked I/O connectors

Type "C" I/O Shield (Intel Caymen Compatible)

Regulatory

FCC Class B (Declaration of Conformity)

European Community CE (Declaration of Conformity)

Warranty

3 Year Manufacturer's Warranty

Specifications may change without notice

Package List

- Tomcat i810 motherboard / User's manual

- 40-pin IDE & 34-pin floppy cable pack

- 80-pin ATA-66 IDE cable

- Driver disk