Benefits and Applications

Based on the VIA P4X266, the Trinity 510 supports the Intel Pentium 4 Processor and up to 2GB of DDR memory. This combination provides outstanding performance for high-end graphics and multimedia applications including streaming audio and video, digital imaging and video editing, 3D gaming, voice recognition and more. The Trinity 510 also features a 4x AGP slot for adding a fast graphics accelerator, four DDR slots for maximum memory expansion, ATA-100 support for fast disk access, USB ports for connecting external peripherals and more!

Processor

Single PGA478 ZIF socket

Supports one Intel Pentium 4 processor

Onboard VRM (VRM 9.0 spec)

Front-Side Bus support for 400MHz

Chipset：

VIA P4X266 chipset

VT8753 north bridge and

VT8233(C) south bridge

Winbond LPC Super I/O ASIC

System Memory：

Four 2.5v 184-pin DDR DIMM sockets

Supports up to 2GB of Unbuffered DDR RAM

Expansion Slots：

One AGP slot supports 2x and 4x graphics mode

Five 32-bit 33MHz (5-volt) PCI slots

(v2.2 compliant)

Total of six usable slots

Integrated I/O

One floppy connector supports up to two drives

Two 9-pin 16550-based serial ports

One 25-pin SPP/ECP/EPP parallel port

Two USB ports

PS/2 keyboard and mouse ports

Integrated Audio (optional)

VIA VT1611A controller

AC'97 audio codec

One MIDI/game port

Line-in, Line-out and Mic-in ports

Note:

The Trinity 510 (S2266) accepts a standard ATX 2.01 power supply, with a minimum output of 30 amps on the 5-volt line.

Integrated PCI IDE

Dual-channel master mode

Up to four Enhanced IDE devices

Support for ATA-100/66/33 IDE and ATAPI compliant devices

Integrated LAN (optional)

On-board network controller

10/100Mbps data transfer rate

3-pin Wake-on-LAN (WoL) header

Hardware Monitoring

Winbond hardware monitoring ASIC

CPU temperature, voltage, and fan speed monitoring

BIOS

Award BIOS on 2Mb Flash ROM

Supports APM v1.2 & ACPI v1.0

User settings for hardware monitoring

Auto-configuration of IDE hard drive types

Muliple boot options

DMI 2.0 compliant

Form Factor

ATX footprint (12" x 9.6", 304.80 x 243.84mm)

One 20-pin ATX power connector

Stacked parallel (one) and serial (two) ports

Stacked USB (two) ports and LAN (one-optional) ports

Stacked keyboard and mouse ports

Regulatory

FCC DoC (Declaration of Conformity)

European Community CE (Declaration of Conformity)