Trinity i845 (S2090) Motherboard

wpe2E.jpg (80730 字节)

Trinity i845 (S2090) Motherboard

 

 

Benefits and Applications

The Trinity i845 brings next-generation processor performance to the masses. Utilizing the Intel 845 chipset, this new system board supports the latest Socket 478 Intel Pentium 4 processors, as well as cost-effective Synchronous DRAM. These two features provide exceptional CPU and memory performance at an attractive price. The Trinity i845 also features a 4x AGP slot for advanced graphics performance, six PCI slots for flexible expansion and ATA-100 support.

Note: Item pictured is only representative.

 

Trinity i845 Models

Standard Model

UPC Number

 S2090

6 35872 006258

 

Standard Features

 

Processor

Single PGA478 ZIF socket

Supports one Intel Pentium 4 processor

Onboard VRM

System bus support for 400MHz

 

 

Chipset

Intel 845 chipset

82802AB FWH, 82801BA ICH2

Winbond W83627HW-AW Super I/O ASIC

 

 

System Memory

Three 3.3v 168-pin DIMM sockets

Supports up to 3GB of PC100/133 SDRAM

Supports Unbuffered memory modules

 

 

Expansion Slots

One AGP slot supports 4x cards

(1.5v slot design)

Six 32-bit 33MHz (5-volt) PCI slots

Total of seven usable slots

 

 

Integrated I/O

One floppy connector supports up to two drives

Two 9-pin 16550-based serial ports

One 25-pin SPP/ECP/EPP parallel port

Two USB ports

PS/2 keyboard and mouse ports

 

 

 

 

Note:

The Trinity i845 S2090 accepts a standard ATX 2.01 power supply, with a minimum output of 30 amps on the 5-volt line.

 

 

Integrated PCI IDE

Dual-channel master mode

Up to four Enhanced IDE devices

Support for DMA 100/66/33 IDE and ATAPI compliant devices

 

 

Hardware Monitoring

Winbond W83627HF-AW hardware monitoring ASIC

CPU temperature, voltage, and fan speed monitoring

2-pin chassis intrusion header

 

 

BIOS

Award BIOS on 4Mb Flash ROM

Supports APM v1.2 & ACPI v1.0

User settings for hardware monitoring

Auto-configuration of IDE hard drive types

Muliple boot options

DMI 2.0 compliant

 

 

Form Factor

ATX footprint (12" x 9.6", 304.8 x 243.84mm)

One 20-pin ATX power connector

Stacked parallel (one) and serial (two) ports

Stacked USB (two) ports

Stacked keyboard and mouse ports

 

 

Regulatory

FCC DoC (Declaration of Conformity)

European Community CE (Declaration of Conformity)

 

 

 

 


所提及之品牌与产品皆属其对应之所有权人

本站硬件博物馆图片硬件论坛会员藏品图片均有版权,必须保留Logo、注明出处或取得所有者授权。

关于我|网站地图|联系我