Based on Intel®
810-DC100 chipset, P681-Ae+ ATX mainboard brings technologies of STR,
ATA 66, 3D Graphics, AC97 Audio and 100 MHz FSB.
Structured on Slot 1 design and 100 MHz system bus
platform, Tekram P681-A+ motherboard supports Intel® Pentium II/III
up to 733MHz and CeleronTM CPU up to 500MHz internal
frequency. This P681-A+ mainboard is equipped with Intel® 82C810-e
chipset and integrating 3D AGP Graphic Accelerator, AC97 Audio
Controller, STR and MC97 modem upgrade through AMR; all are to provide a
cost performance solution.
Tekram P681-A+ mainboard is based on the ATX form
factor and the Intel® 810-DC100 chipset, which consists of the
82810, Graphics memory Control Hub (GMCH) north bridge, the 82801, I/O
Control Hub (ICH) south bridge, and the 82802, Firmware Hub (FWH).
Supporting for 100/66 MHz system bus processors, it brings
next-generation processor technology to the Mainstream PCs. And, with
100 MHz display cache support, it also delivers another truly
next-generation feature set which is integrated 3D AGP graphics engine
with DVD hardware acceleration, AC97 Audio and SB-Link to support for
Sound Blaster Pro and FM synthesis legacy audio.
Tekram P681-A+ supports the new ATA 66 interface
which increases the IDE hard disk performance up to 66MB/Second data
transfer rate. Two 168-pin DIMM Sockets support up to 512MB SDRAM memory
capacity for intensive computation. It supports PC-100 SDRAM as well. In
the meantime, Modem Ring-in, Keyboard, Mouse Power On and Wake Up On Lan/Modem
have increased the versatility of Power On feature. An Audio Modem Riser
Card (AMR) slot is provided to support the inexpensive MC97 compliant
modem adapter upgrade. Also, built with 5 PCI and 1 PCI/ISA slots, the
P681-Ae+ maximizes I/O expandability, and the Hardware Monitoring design
allows users to self-diagnose CPU temperature, CPU fan speed and
voltage. On board I/O feature like MIDI/Game Port is available for game
applications. In addition, a daughter board supports digital video
output to TV output or panel link output is optional.
Most important, the features of STR (Suspend to RAM)
and ACPI BIOS implementation allow these boards to use the
"Instantly Available" technology. The "Instantly
Available PC" is to reduce huge power dissipation while the PC
sleeps in the STR state. The PC can quickly resume, in matter of
seconds, to the previous operation, and offers "deep sleep yet
communicating" ability.
Supporting
all Slot 1 processors, including Intel Pentium II/III up to 733
MHz and Celeron CPU up to 500MHz
True
100MHz FSB support to provide better system performance
AC97
link for Audio/Modem
3D
Graphics with direct AGP
Suspend
to RAM (STR) to support "Instantly Available" PC
AMR
support for MC97 modem upgrade
ATA
66 IDE interface support
Modem
Ring-In/Keyboard/Mouse Power On
Wake
Up on LAN/Modem (internal)/Modem (external)
Hardware
Monitoring for Voltage, CPU Fan and CPU Temperature
High
Performance X-Store Pro IDE Bus Master Software Driver included
Anti-Virus
PC-Cillin Software to prevent System-virus for Win95/98/NT
SB-LINK
to support Sound Blaster card for early DOS game
Processor:
Slot 1 support Intel Pentium II/III up to 733MHz and Celeron CPU
up to 500MHz
Chipset:
Intel® 82810-DC100
BIOS:
Award® PCI BIOS, supporting ACPI, DMI and Plug-and-Play
Boot from CD-ROM, SCSI, LS-120 , ZIP devices
Symbios® SCSI BIOS
Anti-virus BIOS to prevent Boot-Virus
System
Memory:
(2) 168-pin DIMM Sockets up to 512MB SDRAM Memory Capacity
Support PC-100 SDRAM
On-board
I/O Features:
(1) Floppy Port ( Up to 2.88MB )
(1) Parallel Port ( EPP, ECP Port)
(2) Serial Ports ( 16550 Fast UART Compatible)
(2) USB Ports
(1) IrDA TX/RX Header
(1) digital Video Output Header
(1) MIDI/Game Header
(1) Audio Jack: Line Out, Line In, and Mic. In
(1) Video Port
PCI
Bus Master IDE:
(2) UltraDMA/66 IDE Ports Support up to 66MB/sec
Expansion
Slot:
(5) 32-bit PCI Bus Master Slots
(1) AMR Slot
(1) PCI/ISA Slot
ATX
Power Connector:
3V, 5V and 12V 20 Pin ATX Power Connector
Switching
VR:
Switching Voltage Regulator to support 1.3V to 3.5V
