P6L40-A4
Pentium®II Processor
- AGP Slot - 4 PCI Bus Master Slots - 3 ISA Bus Slots - Bus Mastering
PCI IDE and Super I/O - ATX Form Factor.
|
|
The P6L40-A4X provides
support for the new Advanced Graphics Port (AGP), which offers a
theoretical peak transfer rate to 528MB/s by using "X2 Mode".
The ATX form factor allows for more efficient system assembly with
built-in mouse, serial and parallel port connectors.
|
| SLOT
1 architecture supports Intel?Pentium?II processors
233Mhz-366Mhz |
| Intel?440LX
PCIset |
| Bus
Speeds of 60Mhz, 66Mhz, 75Mhz and 83Mhz supported |
| Flash
EPROM - Award PCI BIOS supports Advanced Power Management, On
screen "Plug-and-Play" Setup |
| Enhanced
IDE and Super I/O, LS-120, ZIP devices supported |
| (4)
168-pin DIMM Sockets support a maximum 512MB RAM |
| EDO
DRAM DIMMs supported |
| 3.3V
SDRAM DIMMs of the following types are supported: Buffered,
Non-Buffered, SPD |
| (2)
UltraDMA/33 PCI Bus Master IDE Ports - LBA Mode, Enhanced PIO
Mode 4, HD Autodetect |
| Double-Decker
ATX Style I/O Connectors: (2) USB Ports, PS/2 Mouse &
Keyboard, (2) Serial Ports, (1) Parallel Port |
|
| Processor: |
- SLOT 1 architecture supports Intel®Pentium®II
(up to 366Mhz)
- Intel®Celeron®Processors (up to
333Mhz) supported
- Speed Switching Voltage Regulator: 1.3V~3.5V
|
| Chipset: |
- Intel?440LX PCIset
- 60Mhz, 66Mhz, 75Mhz and 83Mhz Speeds supported
|
| BIOS: |
- Flash EPROM
- Award?PCI BIOS
- On screen "Plug-and-Play" Setup
- On-board Symbios?SCSI BIOS
|
| Cache
Memory: |
- Built-in to Pentium?II processor module
|
| System
Memory: |
- (4) 168-pin DIMM Sockets
- Maximum 512MB RAM
- EDO DRAM DIMMs
- 3.3V SDRAM DIMMs
- Buffered, Non-Buffered, SPD EEPROM supported
|
| On-Board
EIDE: |
- (2) UltraDMA/33 PCI Bus Master IDE Ports
- LBA Mode, Enhanced PIO Mode, 4HD Autodetect
|
| On-Board
Super I/O: |
- (1) Floppy Controller (up to 2.88 MB)
- (2) Serial Ports (16550 UART)
- (1) Parallel Port (EPP/ECP)
- (2) USB Ports
|
| Expansion
Slots: |
- (1) AGP Slot
- (4) 32-bit PCI Bus Master Slots
- (3) 16-bit ISA Slots
|
| Options: |
- IrDA Infrared External Kit
|
| Dimensions: |
- ATX Form Factor: 305mm x 195mm (12.0" x 7.7")
|
|
